CGLES385FS6 Frigidaire Wall Oven - Parts

This is an authentic mounting screw, which works with ranges, wall ovens, cooktops and warming drawers.

This switch allows you to choose which size burner you require according to the size of the pots and pans you're using.

You can adjust the size of the burner you want to use to match your pots/pans.

This high-quality Frigidaire Element Cover is a crucial component designed to protect the underlying heating elements in your appliance. Made with an emphasis on durability, it ensures your appliance functions efficiently for longer durations. It offers an optimum fit, eliminating any complications during installation and adhering strictl...Read morey to safety standards. Being an authentic Frigidaire component, you can be assured of its reliability and compatibility. This Element Cover promises to be a strong and worthy investment toward maintaining your appliance's top-notch performance. Choose this Frigidaire Element Cover for a seamless, productive, and hassle-free experience.

This range surface element switch, also known as an infinite switch or burner control switch, regulates the heat output of the large 8-inch surface burner on your stove, oven, or cooktop. Designed for precise temperature control, it ensures consistent cooking performance. Ideal for replacing a faulty switch, this OEM component restores pr...Read moreoper burner operation. Installation typically involves disconnecting power, removing the old switch, and securing the new one in place.

This oven door light switch signals the light to turn off when the oven door closes. If your light switch is defective or you smell a burning odor, make sure to check the switch and replace it. The tool needed for this replacement is a screwdriver. Locate the switch, usually from under the oven top. Remove the wires and pull the switch ou...Read moret. Refer to the diagram provided by the manufacturer for further instructions and guidance before installation. Make sure you remember to unplug the oven from the power source before starting this repair, and wear gloves for protection.

This part has been replaced by the manufacture. It may differ in appearance but will still function the same.

This convection fan blade is designed for use with various makes and models of range and oven and is sold as an individual part. Made of metal and measuring approximately 4.75-inches in diameter, this genuine OEM fan blade works with the convection motor to circulate and distribute heat evenly throughout the oven. If your oven is not gett...Read moreing hot enough or the heat is not circulating properly, or if the fan blade in your oven has become warped, damaged, or chipped, it needs to be replaced immediately. To replace the fan blade, disconnect your range from the power and locate the fan assembly. With the appropriate screwdriver and wrench, remove any assembly covers and the securing nut from the blade. Once the nut is removed, install the new blade and secure it and re-install the cover.

This is the exterior door panel with glass. Outer glass is NOT sold separately.

This is a light lens retainer clip and it is used in conjunction with the oven on your range. This retainer clip secures the light lens to the oven cavity. The part is made entirely of metal, and it is thin and bow-shaped. The retainer clip is roughly 3.5 inches long and 2 inches wide. The most common reason for needing to replace this pa...Read morert is if your current one is damaged or missing. This clip is a genuine OEM piece sourced directly from the manufacturer.