- Home
- CGE29DM5TDS5
- Instructions
CGE29DM5TDS5 General Electric Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
change water filter
29 of 65 people
found this instruction helpful.
-
Cesar from ROYAL PLM BCH, FL
- Really Easy
- Less than 15 mins
un twist old one and twist the new one
Was this helpful?
Thank you for voting!
freezer temperature was warm, but freezer evaporator frozen
2 of 3 people
found this instruction helpful.
-
Generoso from Ocala, FL
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
unplugged the electrical connection from the wall, took out the top and bottom shelves from the freezer (freezer located in the lower part of fridge)
took out the freezer door by unscrewing 4 screws (2 on the right 2 on the left) unscrew 2 screws on the back panel, unplugged the fan cables to uncover the evaporator, disconnected the ... Read more thermistor, cut the wire about 1/2 inch, unhooked and unplugged the defrost heater, unscrew 1 screw.
with 2 Splice Lock Wire Terminals connected the new thermistor with the old thermistor wires and placed it back to the evaporator.
placed the new defrost heater to the bottom of the evaporator, screwed 1 screw back and plugged it back.
took out the freezer door by unscrewing 4 screws (2 on the right 2 on the left) unscrew 2 screws on the back panel, unplugged the fan cables to uncover the evaporator, disconnected the ... Read more thermistor, cut the wire about 1/2 inch, unhooked and unplugged the defrost heater, unscrew 1 screw.
with 2 Splice Lock Wire Terminals connected the new thermistor with the old thermistor wires and placed it back to the evaporator.
placed the new defrost heater to the bottom of the evaporator, screwed 1 screw back and plugged it back.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Hinge on bin had broken
1 person
found this instruction helpful.
-
Joel from BURKE, VA
- Really Easy
- Less than 15 mins
Knocked up on the old bin.it came out easily. Then placed the new bin over fitters. There were two.
All worked
All worked
Was this helpful?
Thank you for voting!