CGBD48RSBX Thermador - Overview

This is a cooktop burner igniter that is compatible with various makes and models of cooktops and ranges and is sold as an individual part. This part creates a spark that ignites the burner within your cooktop or stovetop and is made of a combination of metal and ceramic. If the ceramic insulator is cracked or broken in any way upon inspe...Read morection, this igniter will need to be replaced immediately. Before replacing this igniter, make sure your cooktop or range is unplugged from any sources of electricity and that the gas supply is shut off.

This authentic OEM venturi tube, also known as a gas tube connector or surface burner tube, mixes gas and air to create the proper fuel-air mixture for combustion in your range. It is typically located in the burner assembly, connecting the gas supply line and the burner. If the venturi tube is broken, you may observe gas leaks around the...Read more burner and an abnormal or flickering flame. Failure to replace a broken tube can result in inefficient combustion and poor burner performance. To replace the venturi tube in your range, remove any components covering the burner assembly, such as the burner grate. Consult your user manual for guidance on accessing the venturi tube. Use a wrench or pliers to disconnect the tube from its connections. Please be aware that this replacement part is sold individually.

This spacer kit, also known as a grate foot kit, is a set of four padded feet designed to protect your burner grates and prevent scratches on the cooktop. Typically located at the bottom corners of the grates, these feet create a protective layer between the grates and the cooktop surface. You can tell if a grate foot is worn out by check...Read moreing for signs of damage. Look for any missing pieces or significant flattening of each foot. Your grates may also wobble or not sit level on the cooktop. If the grate feet are not replaced when they are worn out, cooking can become difficult. Unsteady grates may lead to spills, while direct contact with the cooktop can cause scratches, damage, or discoloration. To replace the grate feet, start by unplugging the appliance and shutting it off at the circuit breaker. You will need a putty knife and high-temperature adhesive. Lift the burner grate and turn it over. Use the putty knife to pry out the worn-out foot and clean its slot as thoroughly as possible. Attach the new foot into the slot using adhesive. Remember that each genuine OEM kit contains four feet, so make sure to confirm the required quantity for your cooktop before purchasing.

This nut is designed for use with different makes and models of ranges and cooktops and is a genuine OEM part. This nut is 1mm thick and is 22-threads-per-inch, and is made of high-quality, durable stainless steel. This nut is used to primarily seal and secure the cooktop to your range.

This OEM control panel switch, also known as a limit switch or limit sensor, is mounted within the control panel housing on ranges. It is a small component that is responsible for transferring power to the control panel, enabling and disabling the control panel lockout, and for controlling certain oven functions using the knobs. The senso...Read morer can fail due to physical damage or an electrical fault, resulting in difficulties operating the range. To access the switch, first remove the range control panel cover. Unplug the switch from its mounting position and place the new one in its place. Ensure that the new limit switch is properly aligned and secure before reattaching the panel cover.

This grid offers a sturdy, heat-resistant surface for supporting cookware inside your appliance, ensuring even heat distribution and safe handling. Built from durable materials, it withstands high temperatures and frequent use without warping. Ideal for replacing a worn or damaged grid, this part restores cooking efficiency and safety.

This surface burner head is for ranges. Surface burner head distributes the gas through holes or slots to create an even flame across the cooking area.