CG33EJ Metabo HPT Brush Cutter - Overview

This individually sold grommet is a genuine OEM part and is used for a variety of different small engine/outdoor lawn equipment. The return fuel line from the carburetor is installed through this grommet, which creates a seal to prevent future leaks and ignition issues. Over time and through exposure to fuel, the grommet can wear down, le...Read moreading to cracks, tears, and missing pieces. If you notice fuel is leaking during operation, or are having issues with starting the engine, this grommet may be the cause. Depending on your model, installing the return line in the grommet and then installing both together in the fuel tank may be easiest, rather than installing them separately.

The fuel pipe/fuel line assembly is a genuine OEM parts kit used in gas-powered outdoor equipment with dimensions of 5mm x 160mm. It includes a pipe or line, which carries fuel from the tank to the carburetor, and a rubber grommet which holds the fuel line in place. The grommet also has a flange that prevents it from being pulled into the...Read more body of your equipment. Over time the grommet may wear down and the fuel line can become brittle and crack causing fuel leakages and difficulty starting or running your equipment. Therefore, it is important to routinely inspect this assembly and replace it when it shows signs of wear. Before your repair, drain the fuel for your safety and to prevent contaminating the fuel tank. To install a new fuel pipe assembly, simply pull off the old grommet and detach the fuel line. Carefully insert your new fuel line into the new grommet and connect the line to the carburetor and the fuel filter inside the fuel tank on your equipment.

Also known as a priming bulb, this OEM replacement part is an individually sold rubber primer bulb. Since it is made of rubber, it will eventually lose its elasticity and crack or break,and need replacing. It is designed for use with a variety of different small engine equipment and is also known as a purge bulb. Pressing this primer bulb...Read more forces fuel through the fuel line and into the carburetor from the fuel tank. Once the carburetor is has a sufficient level of fuel, any excess fuel will be forced back into the fuel tank through the return line attached to the carburetor. If your primer bulb has a darker appearance or has lost its elasticity and does not return to its original shape, it means the rubber will likely soon crack, which will lead to fuel leaking into the engine and ignition system. To replace your primer bulb, simply remove the outside cover and primer bulb cover and replace the bulb within its housing.

This replacement foam air cleaner element is sourced directly from original equipment manufacturer. It is a genuine item commonly used with Tanaka handheld lawn and garden equipment. It is helps to filter out dust and debris from contaminating the engine. This foam filter is sold individually. Please note, the filter cover and the base ar...Read moree both sold separately. Replacing this element is a simple task that does not require any tools. • Remove the cover knob • Take off the cover and replace the filter element • Reassemble and test the equipment

This is a genuine OEM replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article and vide...Read moreo on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.

This is a genuine OEM sourced replacement part designed for use with grass trimmers/cutters. The purpose of the eyelet is to let the cutting line out of the spool assembly with out damaging the part of the housing the the eyelet is installed in. It also allows the cutting line to exit the spool smoothly with out being cut. It is made out...Read more of metal and it is sold individually. No tools are needed to replace this eyelet. Simply insert into the opening of the spool housing.

This fuel pipe is an OEM part designed for use with handheld lawn and garden equipment. This pipe is used to deliver fuel from the fuel tank to the carburetor, but because of the build material, it may wear over time and eventually wear out completely. Made from high-quality, durable rubber, this pipe is sold individually. Measuring 6-inc...Read morehes long, this pipe features a rubber grommet in the center. It is recommended that you replace the fuel filter for your equipment as well, if this fuel pipe needs to be replaced. Check the user manual for your equipment for exact placement and installation of this component.

It is an authentic OEM sourced starter assembly, it is specially designed for use with Tanaka equipment. This is the mechanism that allows a user to pull-start the engine, over time any of the components may wear out and begin to fail eventually requiring a replacement. It is a complete assembly which includes the durable plastic housing,...Read more the starter pulley, the starter spring, and the pull rope with the grip, please note the hardware to secure it is sold separately.

This is an original replacement part manufactured for use with Tanaka trimmers. This plastic reel holds the trimmer line, and is also know as a spool. The reel is sold individually, please see parts diagram for additional parts.

It is a genuine OEM supplied replacement grommet that is specially made for Tanaka gas powered equipment. This grommet is connected to the fuel hose helping to secure it and preventing any leaks. Over time it may deteriorate and crack eventually requiring replacement to maintain air-tight seal. It is made from high-quality rubber material and it is sold individually.

This starter rope is an authentic replacement part provided by the original equipment manufacturer. It is frequently used for yard equipment such as trimmers. This rope is used to manually start the engine. It is sold individually, and it should be replaced if it is frayed or beginning to wear out.

This authentic component is supplied directly from the original equipment manufacturer for use with Tanaka lawn and garden equipment. The cap is used to connect the spark plug to the magneto. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. Please make sure to refer to the appropriate d...Read moreiagrams of your model for the correct location and application of this cap spark plug assembly. Keep in mind one durable rubber cap and a metal spring are included.