CG24EKSL Hitachi Trimmer - Overview

This individually sold grommet is a genuine OEM part and is used for a variety of different small engine/outdoor lawn equipment. The return fuel line from the carburetor is installed through this grommet, which creates a seal to prevent future leaks and ignition issues. Over time and through exposure to fuel, the grommet can wear down, le...Read moreading to cracks, tears, and missing pieces. If you notice fuel is leaking during operation, or are having issues with starting the engine, this grommet may be the cause. Depending on your model, installing the return line in the grommet and then installing both together in the fuel tank may be easiest, rather than installing them separately.

Also known as a priming bulb, this OEM replacement part is an individually sold rubber primer bulb. Since it is made of rubber, it will eventually lose its elasticity and crack or break,and need replacing. It is designed for use with a variety of different small engine equipment and is also known as a purge bulb. Pressing this primer bulb...Read more forces fuel through the fuel line and into the carburetor from the fuel tank. Once the carburetor is has a sufficient level of fuel, any excess fuel will be forced back into the fuel tank through the return line attached to the carburetor. If your primer bulb has a darker appearance or has lost its elasticity and does not return to its original shape, it means the rubber will likely soon crack, which will lead to fuel leaking into the engine and ignition system. To replace your primer bulb, simply remove the outside cover and primer bulb cover and replace the bulb within its housing.

This is a genuine OEM replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article and vide...Read moreo on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.

This is a genuine OEM sourced replacement part designed for use with grass trimmers/cutters. The purpose of the eyelet is to let the cutting line out of the spool assembly with out damaging the part of the housing the the eyelet is installed in. It also allows the cutting line to exit the spool smoothly with out being cut. It is made out...Read more of metal and it is sold individually. No tools are needed to replace this eyelet. Simply insert into the opening of the spool housing.

This fuel pipe is an OEM part designed for use with handheld lawn and garden equipment. This pipe is used to deliver fuel from the fuel tank to the carburetor, but because of the build material, it may wear over time and eventually wear out completely. Made from high-quality, durable rubber, this pipe is sold individually. Measuring 6-inc...Read morehes long, this pipe features a rubber grommet in the center. It is recommended that you replace the fuel filter for your equipment as well, if this fuel pipe needs to be replaced. Check the user manual for your equipment for exact placement and installation of this component.

This item has been OEM sourced to ensure a high level of quality. The clip is intended to be used with trimmers and blowers from Hitachi and Tanaka. The metal clip is part of the fuel system. The clip is used to fasten the fuel filter and the fuel line assembly. This part is priced as an individual replacement part.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Tanaka and Hitachi lawn and garden equipment. The purpose of this gasket is to provide an air-tight seal for the carburetor, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. ...Read moreIt is a high-quality item that is made of durable composite material and is sold individually, over time it may wear out and begin to crack eventually requiring a replacement.

This is an original replacement part manufactured for use with Tanaka trimmers. This plastic reel holds the trimmer line, and is also know as a spool. The reel is sold individually, please see parts diagram for additional parts.

This is a genuine Hitachi replacement part. The fuel pipe is designed by the manufacturer for use in grass trimmers and bulb planting drills. This part is made of flexible rubber, and is used to carry unused fuel back to the fuel tank. The fuel pipe is supplied as an individual replacement part.

This piston ring is a small metal ring in an engine that seals the gap between the piston and the cylinder wall. It prevents the escape of combustion gases and maintains compression. When damaged, oil will leak into the combustion chamber and cause performance problems within the engine. You may experience rough running and a loss of powe...Read morer or notice that blue smoke is coming out from the exhaust when this happens. To remove the piston ring from your machine, you need to detach the piston from the engine. Using a small screwdriver, pry the damaged piston ring away from the piston and slide it off. Be careful not to scratch the piston nor the cylinder walls during this process. You may also need to compress the ring to remove or install it onto the piston. Please note that this authentic OEM replacement part is sold individually. It is recommended to replace your piston rings all at once as they wear out at the same rate, so be sure to read your user manual and confirm how many rings your machine will need.

This part is available as an individual replacement. The metering diaphragm goes between the diaphragm gasket and the diaphragm cover. During replacement, it may require a screwdriver to help install this item correctly. It is made of a thin material and will need to be replaced if it becomes broken. This is a genuine OEM sourced part whi...Read morech is specially designed for use with Tanaka and Hitachi blowers, chain saws, drills, trimmers, and saws.