CG24EKB Hitachi Trimmer - Overview

This piston ring is a small metal ring in an engine that seals the gap between the piston and the cylinder wall. It prevents the escape of combustion gases and maintains compression. When damaged, oil will leak into the combustion chamber and cause performance problems within the engine. You may experience rough running and a loss of powe...Read morer or notice that blue smoke is coming out from the exhaust when this happens. To remove the piston ring from your machine, you need to detach the piston from the engine. Using a small screwdriver, pry the damaged piston ring away from the piston and slide it off. Be careful not to scratch the piston nor the cylinder walls during this process. You may also need to compress the ring to remove or install it onto the piston. Please note that this authentic OEM replacement part is sold individually. It is recommended to replace your piston rings all at once as they wear out at the same rate, so be sure to read your user manual and confirm how many rings your machine will need.

This is an original replacement part manufactured for use with outdoor power equipment. The recoil spring is used to provide tension to rewind the starter rope after pulling to start the engine. This spring is available as an individual replacement part and is also part of the starter assembly. Please see model diagram for associative parts.

This authentic part is supplied by the original equipment manufacturer for use with Tanaka and Hitachi equipment. The spring is utilized to apply tension to the clutch mechanism. Unfortunately, over time it will wear out and it may begin to stretch eventually requiring a replacement. This high-quality spring is made of durable metal and i...Read mores sold as an individual item. Check the diagrams for your model to ensure the proper repair procedure. A wrench set, a screwdriver, and pliers might be needed to replace this clutch spring.

This is an OEM part sourced directly from the manufacturer. The throttle lever is commonly found in pole saws and trimmers from Tanaka and Hitachi. This part is made of high-quality plastic, and is used to control the speed of the engine. You may require a screwdriver or Allen wrench when replacing this item. The throttle lever is available as an individual replacement part.