CG22EADSLP Hitachi Trimmer - Overview

This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sold individually. This part will be found in various locations, depending on your model; refer to your owners manual to locate it on your mach...Read moreine, but is commonly found on the side of the air cleaner or carburetor. To complete this repair, you will need a screwdriver. The Purge Bulb needs to be replaced when it is cracked or damaged. It will become fatigued through regular use and may leak fuel when it is malfunctioning. Customers rated this repair as Easy.

This individually sold grommet is a genuine OEM part and is used for a variety of different small engine/outdoor lawn equipment. The return fuel line from the carburetor is installed through this grommet, which creates a seal to prevent future leaks and ignition issues. Over time and through exposure to fuel, the grommet can wear down, le...Read moreading to cracks, tears, and missing pieces. If you notice fuel is leaking during operation, or are having issues with starting the engine, this grommet may be the cause. Depending on your model, installing the return line in the grommet and then installing both together in the fuel tank may be easiest, rather than installing them separately.

This is a genuine OEM replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article and vide...Read moreo on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.

This OEM-made cleaner element, also known as an air filter, helps keep the engine clean by filtering the air that goes inside. It is 1/4 inches in height, 3 1/2 inches in length, 1/2 inches in width, and usually found in a housing near the engine of your lawn equipment. To check if it is broken, look for tears, holes, and debris on it. Wh...Read moreen the filter is damaged or clogged, it restricts the airflow in your machine. This can cause problems like potential misfires, expensive repairs, and even engine failure. To replace your cleaner element, you will need to access the element housing and remove retaining screws or clips using a socket or screwdriver. Once you slide out the housing cover, lift the element out of your machine. Prior to installing the new cleaner element, it is advisable to refer to your owners manual as your machine may have specific instructions for this procedure.

This is an authentic OEM sourced replacement part commonly utilized on Hitachi and Tanaka handheld lawn and garden equipment. The purpose of a spark plug is to deliver electric current to an internal combustion engine. Symptoms of a failing or faulty spark plug include difficulty starting the saw or a complete failure to start. Please not...Read moree, this item is sold individually. You would need a spark plug wrench or a socket wrench to complete this repair.

Genuine manufacturer approved replacement switch, it is used on Tanaka and Hitachi handheld lawn and garden equipment. It is the part of the unit handling on/off operations. Over time switch may develop mechanical or electrical issues eventually failing and requiring replacement. Please note this durable plastic switch is sold individually.

This is a genuine OEM replacement part designed for Hitachi power equipment. The purpose of fuel line is to to return excess fuel back on the system. By pressing the primmer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into the tank through the fuel return line. It is made out of rubber a...Read morend it is sold individually. Over time the fuel lines will deteriorate and become brittle so they would need to be replaced.

This part is available as an individual replacement. The metering diaphragm goes between the diaphragm gasket and the diaphragm cover. During replacement, it may require a screwdriver to help install this item correctly. It is made of a thin material and will need to be replaced if it becomes broken. This is a genuine OEM sourced part whi...Read morech is specially designed for use with Tanaka and Hitachi blowers, chain saws, drills, trimmers, and saws.

This is an original replacement part manufactured for use with outdoor power equipment. The recoil spring is used to provide tension to rewind the starter rope after pulling to start the engine. This spring is available as an individual replacement part and is also part of the starter assembly. Please see model diagram for associative parts.

This starter rope is an authentic replacement part provided by the original equipment manufacturer. It is frequently used for yard equipment such as trimmers. This rope is used to manually start the engine. It is sold individually, and it should be replaced if it is frayed or beginning to wear out.