My Orders
CFUM21LS0 Crosley Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
door handle broken at screws
3 of 5 people
found this instruction helpful.
-
SALLY from DICKINSON, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
removed 4 screws-replaced handle-very easy-worked great
Was this helpful?
Thank you for voting!
handle broke at the attachment point on the door
3 of 5 people
found this instruction helpful.
-
Dylan from Celina, OH
- Really Easy
- Less than 15 mins
-
Screw drivers
removed two pieces of trim.....removed four screws of old handle.....replaced with new handle....replaced screws.....replaced trim pieces
Was this helpful?
Thank you for voting!
Door handle broke off of the refrigerator
2 of 3 people
found this instruction helpful.
-
Edith from FORT WAYNE, IN
- Really Easy
- Less than 15 mins
-
Screw drivers
Was able to order the handle and screw it on the refrigerator using the screws from the original handle in about 10 to 15 minutes.
Was this helpful?
Thank you for voting!
Fridge door handle broke off, replaced it.
4 of 9 people
found this instruction helpful.
-
Julie from Salt Lake City, UT
- Easy
- Less than 15 mins
-
Screw drivers
Very simple - removed the plates that cover the end of the handel, then removed the screws and the broken handle. There were four screws - did a top one, then a bottom one, then the other top and bottom one. Made sure they were on tight and put the covers back on. Really proud of myself!
Was this helpful?
Thank you for voting!
broken door handle
1 person
found this instruction helpful.
-
Rick from MENDON, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
remove cover plates slide off , exposes screws holding handle on to the door remove screws ( 4) 2on top 2 on bottom replace with new handle in reverse order of disassembly slide cover plates back on , job complete .
Was this helpful?
Thank you for voting!
door handle broke (3rd one) poor design
1 person
found this instruction helpful.
-
Edward from GRAND FORKS, ND
- Really Easy
- Less than 15 mins
-
Screw drivers
replaced handle
Was this helpful?
Thank you for voting!
Stop basket and right side shelf support were broken.
1 person
found this instruction helpful.
-
Gregory from NEW ORLEANS, LA
- Really Easy
- Less than 15 mins
-
Pliers
Used needle nosed pliers to twist and pull out remainder of broken parts (regular pliers would work, fingers might). Used fingers to insert replacements. So, simple, so glad I did it!
Other Parts Used:
Was this helpful?
Thank you for voting!
Just lost key
2 of 4 people
found this instruction helpful.
-
Toni from Little Rock, AR
- Really Easy
- Less than 15 mins
No repair. The key fit!
Was this helpful?
Thank you for voting!
Broken handle
1 person
found this instruction helpful.
-
Dennis from HIXSON, TN
- Really Easy
- Less than 15 mins
Took off 4 screws and replaced the handle. Took less than five minutes.
Was this helpful?
Thank you for voting!
Handle broke loose
1 person
found this instruction helpful.
-
Richard from SWAMPSCOTT, MA
- Very Easy
- Less than 15 mins
-
Screw drivers
Just screwed in the new handle. Must keep the original trim pieces that slide on the top and bottom, or order new ones if needed.
Was this helpful?
Thank you for voting!
Door handle broke off
1 person
found this instruction helpful.
-
Rosemary from LEXINGTON, KY
- Very Easy
- Less than 15 mins
-
Screw drivers
Four screws and slip on the covers! That's it
Was this helpful?
Thank you for voting!
Oven not reaching temperature
1 person
found this instruction helpful.
-
Andrea from MANLIUS, NY
- Really Easy
- Less than 15 mins
-
Screw drivers, Socket set
Using the socket wrench, I removed the old element from the oven wall attached by two hexagonal screws. I then removed the electrical attachment to the oven using a Philips head screw driver. Replaced the element with the new one and reversed the process. The oven works like new!
Was this helpful?
Thank you for voting!
Door wouldn’t stay shut
2 of 4 people
found this instruction helpful.
-
Angela from ORLANDO, FL
- Really Easy
- 30 - 60 mins
-
Screw drivers
Purchased gasket from parts plus installed it and door still won’t stay shut without duct tape plus the frost is building up really bad looking for another parts store to get problem fixed
Was this helpful?
Thank you for voting!
Freezer wouldn’t turn on.
1 person
found this instruction helpful.
-
Robert from HARDING, PA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Put the new temperature control unit in plugged freezer back in and immediately turned on. Very simple repair. Saved a lot of money not having to purchase new or call a repair shop.
Was this helpful?
Thank you for voting!
Lost original key
1 of 2 people
found this instruction helpful.
-
katrina from EAST ORANGE, NJ
- Very Easy
- Less than 15 mins
Brought replacement key works just like original I thought it would be metal from reviews but it was plastic and still works perfectly
Was this helpful?
Thank you for voting!