Move heat away from the cooling system with this refrigerator condenser fan blade. It attaches to the motor near the compressor and pushes air across the condenser coils, helping them release heat. Cracked blades, bent edges, or a loose center opening may cause clicking, vibration, or reduced airflow. Replacing a damaged blade helps resto...Read morere balanced rotation and proper heat removal for steady cooling. Unplug the refrigerator before removing the rear access panel, and ensure the replacement turns freely without touching nearby parts. This is an OEM part sourced directly from the manufacturer.
Refrigerator interior lighting uses a warm-white, 120-volt LED bulb with an E17 base. This bulb is listed for top-mount refrigerators and upright freezers. Check your appliance model to confirm fit. It is an OEM part.
For a refrigerator or freezer, check the appliance model to confirm this OEM screw is the right one. It has an M5 thread, is 16 mm long, and has a quad-drive hex washer head.
This potentiometer wire harness is a genuine OEM replacement designed for refrigerators and freezers. It connects the temperature control dial to the appliance’s electrical circuits, enabling precise temperature regulation and reliable performance. A damaged or faulty harness can lead to inaccurate cooling or loss of control. Installation...Read more requires disconnecting power and following your appliance’s guidelines for proper wiring and secure fit.
This heater helps maintain proper temperature inside your appliance, ensuring efficient operation and consistent performance. Built for durability, it restores functionality when the original heater fails. Installation requires disconnecting power and mounting the heater in its designated position according to your appliance’s specifications.
This refrigerator shelf assembly provides a sturdy, flat surface for organizing food and containers inside your appliance. Measuring 26.7 inches wide, it features a durable glass insert for a clean, modern look and reliable performance. Designed as a direct replacement, the shelf installs easily by resting on the existing supports—no tool...Read mores required. Ideal for replacing cracked, chipped, or sagging shelves to restore storage space and keep your refrigerator organized.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fridge started making a loud racket. Condenser Fan Blade then disintegrated to dust and pieces. The plastic had degraded significantly.
4 of 7 peoplefound this instruction helpful.
Jack from WALLING, TN
Really Easy
15 - 30 mins
Nutdriver, Socket set
The repair itself total time was quick and easy. Since the original fan blade blew apart, it was only a matter of putting the new one on in it's place. This can be done by feeding the blade between the cowling and Condenser coil and applying pressure to get it on the shaft.
If your fan is still on the shaft, simply push it off
... Read moreand extract it the same way. Then place the new one on the shaft.
In my case, since the part would take a couple days to get, and I had food both in the fridge and the freezer, I removed and unplugged the Condenser Fan Motor and the cowling frame and temporarily spliced a small fan I had into the line for the condenser motor. This kept the fridge working long enough to get the replacement part.
Side note. Direction of airflow is towards the Compressor, and draws air across the Condenser coils.
Hope this helps someone. :)
Read less
Was this helpful?
Thank you for voting!
One blade broke from condenser fan
12 of 32 peoplefound this instruction helpful.
Chris from Lockport, NY
Really Easy
Less than 15 mins
The part i recieved, from parts select was a larger in circumfrence (<1/4) than the original. However i was not aware of this until after i treid to repair it.
I removed the broken fan from the condenser. This was very sipmle.
When i pluged the refridgerator back in to the outlet the fan tried to start up but soon be
... Read moregan to make aloud noise, due to there not being enough clerance.
Read less
Was this helpful?
Thank you for voting!
The new motor mount screw holes were not threaded.
1 of 5 peoplefound this instruction helpful.
Greg from henrico, VA
A Bit Difficult
1- 2 hours
Nutdriver, Socket set
I had to tap the screw holes with a 8/32 tap so that the screws would not bind.