All Installation Instructions for General Electric Refrigerator CFRP5NFDCSS

refig light did not work

per your instructions

Parts Used:

paul from east hanover, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

switch wouldn't come out anymore and turn light on

Gently pry out switch in door jam with screwdriver and pull both connectors off and put connectors on new switch then push switch back into the hole. Looked it up on the internet and video showed how to and also had link to new part, ordered and less than a week later the fridge is bright again. I have an older freezer also and it seems that they all use the same switches. Very Very easy

Parts Used:

LIGHT SWITCH

Cynthia from Seatac, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Filter needed replacing

Folowed instructions

Parts Used:

Refrigerator Ice and Water Filter

W Craig from Diamondhead, MS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

replaced filter

none required

Parts Used:

Refrigerator Ice and Water Filter

donnie from metairie, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

ice maker not making ice

I looked up appliance on internet,diagram only showed the inlet valve and ice maker in schematic.I ck'd to see if water was getting to valve(it was)but wasn't getting to ice maker,thus I replaced the valve and it solved the problem.

Parts Used:

Icemaker Water Inlet Valve

joseph from myrtle beach, SC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

Was this instruction helpful to you?

light switch quit working

removed the inside fridge electrical panel and swapped switches

Parts Used:

LIGHT SWITCH

David from Simpsonville, SC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

replace water filter

Easy, with included video and instructions

Parts Used:

Refrigerator Ice and Water Filter

Richard from Waynesboro, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Change Filter

My 14 year old Son

Parts Used:

Refrigerator Ice and Water Filter

GREGORY from SACRAMENTO, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

sticky switch

easy pry out, disconnect wiring, connect on new switch and press in switch.

Parts Used:

LIGHT SWITCH

ANTHONY from NEW EGYPT, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Ice and Water Filter needed replacement

It was easy and fast, like changing a light bulb. The directions were clear and easy to follow. Thank you.

Parts Used:

Refrigerator Ice and Water Filter

Irene from Tigard, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

did not need adapter

exactly as the instructions.......never did see anything about replacing the adapter...therefore i did not

Parts Used:

Refrigerator Ice and Water Filter

terry from fort worth, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Water would not stop flowing.

First I unplugged the refrigerator. I removed the cardboard from the back and unhooked the inlet water line with a wrench and the water line to the ice maker, which was a quick connect. I unplugged the wire harness and removed the valve, then installed the new valve, plugged in the wire harness and hooked up the water lines. I turned on the water line and plugged in the refrigerator. The ice maker works great.

Parts Used:

Icemaker Water Inlet Valve

Mark from Monroe, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Wrench set

Was this instruction helpful to you?

light would not stay on

First I flipped breaker to off position for refigerator, Pulled down on socket and broke it free. Then took needle nose piars to pull wire and plug out from hole, so I could conect to new light socket then snaped it in place . Hardest part was getting wire and plug out of hole.

Parts Used: