All Installation Instructions for Frigidaire Washer Dryer Combo CFLE2022MW0

Latch on dryer no longer worked

So easy! I ordered the part on the website. Received it 24 hours later. And popped it in place. Good as new.

Parts Used:

Door Catch

chris from dallas, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

loud squeeling noise

After changing the drum support bearing, and the front felt ring, the noise continued. It turned out to be the tensioner pully. The harmonic vibration travels throughout the dryer box like an instrument so you can't tell where the sound is comming from. Before you do anything, spray a little wd40 between the bushing and the shaft on the belt tenioner pully. If the squeel goes away, you have found your smoking gun.

Parts Used:

Drum Support Bearing

Lewis from Thornton, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Lint was going everywhere. The new one fits perfectly, but lint is still going alll over

Just put the new one in the slot the old one was in

Parts Used:

Dryer Lint Screen

Christine from DEER PARK, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Very loud squeaking

Opened top, removed front cover, removed belt, took out drum, replaced bearing on drum and bearing guide on back of dryer. Reinstalled drum and belt, then replaced drum glides and upper felt,let glue set with clamps over night.

Parts Used:

Front Upper Felt Seal with Adhesive

Rear Drum Bearing Kit

Drum Glide - White

Drum Support Bearing

william from hackettstown, NJ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Squeaking

Watched Video Provided. Very Simple Repair. Asked my lovely wife to hold drum in place while replacing drive belt. She gladly complied and is back doing what she seems to love most. And no, I'm not kidding. Our washer and dryer seem to run 24/7/365. I've completed various repairs on both appliances over the last couple of years and saved 100's of dollars thanks to this site .

Parts Used:

Rear Drum Bearing Kit

David from PORT CLINTON, OH
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Glide was broken

I watched the video on the repair and followed it. Super easy. Repair only took 30 mins. Please note there are 2 glides. Make sure to order 2.

Parts Used:

Drum Glide - White

Eileen from SHERIDAN, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

LINT FILTER

JUST DROP IT IN WOOOOLA

Parts Used:

Dryer Lint Screen

ANGEL from MIAMI, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

the attached anchors and holes linled up about 80% of the time.

I cut off the four that didn't line up - I suppose since this was a gasket that fit several makes, I should expect this type of problem.

Parts Used:

GASKET

Allan D from REDLANDS, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Top hinge on clothes dryer separated, leaving door difficult to open/close

Ordered part from partselect.com. Part was back ordered; however they were very proactive in communicating status updates! When it arrived it was simply a matter of removing door using a philips screwdriver, installing the new hinge and presto - job complete! Kudos to partselect.com ??

Parts Used:

Door Hinge

Robert from CUMMING, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Dryer lint filter was all torn up after 12 years of use.

Simple: I ordered the part from you then took out the old old and inserted the new one. Took all of 1 minutes

Parts Used:

Dryer Lint Screen

Michael from DUNN, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

lint screen had holes

took out the old one and put in the new one

Parts Used:

Dryer Lint Screen

Carol from COLUMBUS, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Dryer not heating

Very slowly and carefully, you tube videos and schematic very helpful.

Parts Used:

Control Thermistor

Robert from Olmsted, IL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Rear drum bearing and belt needed to be replaced.

Remove top cover and front and remove drum and install a new bearing kit and new belt.

Parts Used:

Rear Drum Bearing Kit

Antonio from LOS GATOS, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

dryer had vibration after couple minutes of running

i read reviews and finally found a person that replace the motor, rear bearing, front top glides, and tension arm/pulley.. i had cleaned the fan motor with a tooth brush best i could the 1 time i had it apart. after the 4th time apart and reading a different review that said replace the fan motor housing/fan. i did and noise gone.

Parts Used:

Front Upper Felt Seal with Adhesive

Drum Support Bearing