All Installation Instructions for Crosley Refrigerator CFD27WIPS3

Replaced door gaskets with new ones

Removed the old door gaskets by hand and attached the new ones by inserting the edges in the existing grooves

Parts Used:

Andres from Golden Valley, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thin, flexible edge on outermost door gasket was tearing from the main gasket, likely due to being rubbed when accessing refrigerator..

Gasket is held in place by an extrusion on the back side. Simply remove the old gasket and press the new gasket's extrusion into the track on the door.

Parts Used:

GASKET-DR,MAGNETIC FF GREY 36

Dennis from Oley, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

GASKET WORN AND LEAKING

SIMPLY REMOVE THE OLD GASKET PULLING LIGHTLY BY HAND
THEN PUSHING THE NEW GASKET BY HAND

Parts Used:

GASKET-DR,MAGNETIC FF GREY 36

Dennis from Lancaster, SC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Filter wouldn't engage

Basically unhooked water lines and removed the screws

Parts Used:

MANIFOLD FILTER

Dennis from OLATHE, KS
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

ice maker is stuck on crushed ice.

We had someone to come and look at it and we were told it was the solenoid valve. The repairman unstuck it for us and said when it does it again, he would have to order the part. We took it upon ourselves to order the part and DIY. We replaced the part that we were told was the problem and "guess what" it's still not fixed. It's still shooting out crushed ice. Will have to call repair guy back out here to see what we did wrong.

Parts Used:

Refrigerator Ice Dispenser Solenoid

Mary from MAGNOLIA, AR
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Ice Maker was making ice erratically

After sending PartSelect the info to their troubleshooting dept. about my ice maker, they recommended replacing the ice solenoid. I did so at a cost of $102. No change, turned out replacing the ice maker(did not purchase from PartsSelect) was the issue and works fine now.

So wasted $102. FYI the part took 6 days to arrive.

Parts Used:

Refrigerator Ice Dispenser Solenoid

Daune from OCALA, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Balls fell out so I needed a new slide

Basically took the broken piece off and put the new one on after removing the part on the new assembly I didn't need to replace ( It was still secure on the freezer) just popped that bad boy on

Parts Used:

Drawer Slide Rail - Left Side

Donna from POUGHKEEPSIE, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Refrigerator water dusoeswr stopped working

I removed the defective water valve. All wiring and tubing connectios were color coded.
It connected the water tubes and electric plugs to new water valve.
The water dispenser worked perfectly after I reconnected everything.

Parts Used:

Water Inlet Valve - 4 Coil

Dean from Pawleys island, SC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench (Adjustable)

1 person found this instruction helpful.

Was this instruction helpful to you?

time to change water filter

first, there many different water filters. your experience will be different according to your water filter type.

Parts Used:

Refrigerator Water Filter

Ronald from Warrensburg, MO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Flipper mullion assembly broke

Removed 1 screw and unplugged flipper mullion assembly and removed it. Plugged in new flipper and one screw and done. Works as it should.

Parts Used:

Flipper Mullion Assembly

Cynthia from CIRCLEVILLE, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

The plastic part broke off. A known issue

Easy to install. Just make sure to line up the back pin. Also ensure your ice is adjusted to the correct amount of your daily usage.

Parts Used:

ICE CONTAINER Assembly

Dennis from Orange, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Original ice maker not working leaking water water out door

Removed exterior housing, sliding old unit forward to release. New unit went in easily. Caution wires don't get pinched.

Parts Used:

Ice Maker Assembly

Michael from FREE SOIL, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

The little plastic bàlls came out of old part

Just took old one off and installed new. The company was great to work with.

Parts Used:

Drawer Slide Rail - Left Side

Culver from RHINELANDER, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Installed new inverter

Secured bracket. Attached electrical contact to the compressor. Secured inverter to bracket.
Problem: the electrical contact cords are very short, therefore it wa difficult to reach the compressor. Even after connecting to the compressor, the cords are under stress.
However, the refrigerator is working fine.

Parts Used:

Inverter Kit

LAVAUGHN from MIAMI, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

1 Broken plastic mullion hinge. Mullion was not operating correctly.

Removed screw on Mullion so that the replacement hinge can slide onto the small plastic bracket on the door. Slid the mullion on the hinges and screwed in muliion (1 screw).

Parts Used: