My Orders
CEB515P4N1WM General Electric Microwave - Overview
Diagrams for CEB515P4N1WM
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$132.89
In Stock
Microwave Glass Turntable Tray
Part #WB39X10032
This 13.5-inch glass turntable tray is designed to fit a variety of microwave models, particularly those from GE and Hotpoint. Constructed from food-safe, heat-resistant tempered glass, it ensures consistent and even heating by rotating food during operation. The tray features a smooth surface and a sturdy build for long-term durability. ...Read moreOn the underside, it includes three distinct grooves that align precisely with the microwave’s central bushing coupler, allowing secure placement and smooth rotation. The outer diameter of the tray is approximately 13.5 inches, while the recessed track underneath measures about 10.25 inches across, ensuring compatibility with standard
Read less
$21.95
In Stock
Microwave Fuse
Part #WB27X11138
This fast-blow glass fuse is a genuine replacement component designed to protect microwave ovens from electrical damage caused by power surges or internal malfunctions. Rated at 20 amps and 125 volts, it interrupts the power supply when excessive current is detected, helping to safeguard sensitive internal components. Measuring approximat...Read moreely 6x30mm (0.24 x 1.18 inches), this fuse is compatible with a wide range of microwave models from GE, Hotpoint, and Frigidaire. Replacing a blown fuse is a common repair when a microwave fails to power on or experiences intermittent electrical issues. Always confirm compatibility with your specific model before installation.
Read less
$34.92
In Stock
Wave Guide Cover
Part #WB39X10034
This waveguide cover protects the microwave’s internal components by shielding the magnetron from moisture, grease, and food splatters, helping prevent sparking and ensuring efficient heating. Made from durable, heat-resistant mica, it’s an easy, tool-free replacement when the original cover becomes burnt or damaged. For the best fit, check your microwave’s model details before purchasing.
$51.88
In Stock
Microwave Door Interlock Switch Bracket
Part #WB14X10049
The door interlock switch bracket houses and supports the door switches.
$16.40
In Stock
DOOR LATCH
Part #WB10X30407
$43.92
In Stock
LEVER SWITCH
Part #WB10X27080
$59.47
In Stock
Microwave Turntable Motor
Part #WB26X32190
This turntable motor is for microwaves.
The turntable motor rotates the glass tray inside the microwave oven.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part.
$49.58
In Stock
ROTATING RING Assembly
Part #WB02X27104
$24.11
Special Order
$61.55
In Stock
THERMOSTAT, 160/0
Part #WB27X11210
$49.50
In Stock
High Voltage Diode
Part #WB26X28935
$54.24
In Stock
Common Symptoms of the CEB515P4N1WM
How this model fails, and the parts that fix it.
Won’t turn on
Fixed by
these parts
these parts
Show All
Door stuck closed
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Sparking
Fixed by
these parts
these parts
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave door was hard to open
4 of 6 people
found this instruction helpful.
1. Take out the case by unscrew 8 screws on the back and side of the case
2. Take out the control panel by unscrew 1 screw on the top and slide up
3. Take out the latch by unscrew 2 screws, and slide out 3 electric switches that clipped on the latch
4. Clip the switches onto the new latch
5. Slide in lever switch into ... Read more latch
6. Put back the latch
7. Put back the control panel
8. Put back the case
2. Take out the control panel by unscrew 1 screw on the top and slide up
3. Take out the latch by unscrew 2 screws, and slide out 3 electric switches that clipped on the latch
4. Clip the switches onto the new latch
5. Slide in lever switch into ... Read more latch
6. Put back the latch
7. Put back the control panel
8. Put back the case
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!