This 13.5-inch glass turntable tray is designed to fit a variety of microwave models, particularly those from GE and Hotpoint. Constructed from food-safe, heat-resistant tempered glass, it ensures consistent and even heating by rotating food during operation. The tray features a smooth surface and a sturdy build for long-term durability. ...Read moreOn the underside, it includes three distinct grooves that align precisely with the microwave’s central bushing coupler, allowing secure placement and smooth rotation. The outer diameter of the tray is approximately 13.5 inches, while the recessed track underneath measures about 10.25 inches across, ensuring compatibility with standard
This fast-blow glass fuse is a genuine replacement component designed to protect microwave ovens from electrical damage caused by power surges or internal malfunctions. Rated at 20 amps and 125 volts, it interrupts the power supply when excessive current is detected, helping to safeguard sensitive internal components. Measuring approximat...Read moreely 6x30mm (0.24 x 1.18 inches), this fuse is compatible with a wide range of microwave models from GE, Hotpoint, and Frigidaire. Replacing a blown fuse is a common repair when a microwave fails to power on or experiences intermittent electrical issues. Always confirm compatibility with your specific model before installation.
This waveguide cover protects the microwave’s internal components by shielding the magnetron from moisture, grease, and food splatters, helping prevent sparking and ensuring efficient heating. Made from durable, heat-resistant mica, it’s an easy, tool-free replacement when the original cover becomes burnt or damaged. For the best fit, check your microwave’s model details before purchasing.
This turntable motor is for microwaves.
The turntable motor rotates the glass tray inside the microwave oven.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part.
This main control board is designed to serve as the central command unit for countertop microwaves, regulating essential functions such as power levels, cooking time, and user interface responsiveness. It manages the magnetron, turntable, and display panel by interpreting user inputs and coordinating the microwave’s internal operations. A...Read more malfunctioning board may result in persistent error messages, unresponsive buttons or dials, or failure to initiate cooking cycles. Replacing the control board can restore full functionality and improve overall performance and reliability. Installation typically involves accessing the internal compartment, disconnecting the faulty board, and securing the new one in place using standard tools. The board is compact and engineered for precise
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
WHEN. YOU OPEN THE DOOR THE TURN TABLE WAS CONSTANTLY RUNNING
9 of 10 peoplefound this instruction helpful.
Moin from SCOTTSDALE, AZ
Really Easy
30 - 60 mins
Pliers, Screw drivers
REPLACE SWITCH -STAND ON (NOT THE SWITCH-MONITOR) THERE ARE TWO OF THESE SWITCHES THE TOP ONE WAS DEFECTIVE. THE ON OFF SWITCH BUTTON ON THE SWITCH WAS BROKEN
Was this helpful?
Thank you for voting!
Microwave door was hard to open
4 of 6 peoplefound this instruction helpful.
Henry from NORWALK, CT
Easy
30 - 60 mins
Screw drivers
1. Take out the case by unscrew 8 screws on the back and side of the case 2. Take out the control panel by unscrew 1 screw on the top and slide up 3. Take out the latch by unscrew 2 screws, and slide out 3 electric switches that clipped on the latch 4. Clip the switches onto the new latch 5. Slide in lever switch into
... Read morelatch 6. Put back the latch 7. Put back the control panel 8. Put back the case
Slide a Butter knife at left side by open push knob door will open. Then open all screws from top cover push cover top side front way then door locks Bracket have 3 microswitch pulls out switches mark them top medium and bottom. Remove 3 screws holding brackets will come out. On bottom see a Cam has 1/4” holes can holding Saft broken then
... Read more install new door lock bracket install microswitch put 3screw and slide Cam on saft . I put a small screw on saft to hold cam on place. There was no screw . That’s why cam saft was broke. Put top cover tight all the screws and door lock fixed.