CEB1590SJ1SS General Electric Microwave - Overview
Sections of the CEB1590SJ1SS
[Viewing 4 of 4]Keep searches simple, eg. "belt" or "pump".
Microwave Glass Turntable Tray
PartSelect #: PS3486810
Manufacturer #: WB39X10032
This 13.5-inch glass turntable tray is designed to fit a variety of microwave models, particularly those from GE and Hotpoint. Constructed from food-safe, heat-resistant tempered glass, it ensures con...
$132.89
In Stock
Microwave Fuse
PartSelect #: PS3486694
Manufacturer #: WB27X11138
This fast-blow glass fuse is a genuine replacement component designed to protect microwave ovens from electrical damage caused by power surges or internal malfunctions. Rated at 20 amps and 125 volts,...
$55.29
In Stock
Wave Guide Cover
PartSelect #: PS3486812
Manufacturer #: WB39X10034
This waveguide cover protects the microwave’s internal components by shielding the magnetron from moisture, grease, and food splatters, helping prevent sparking and ensuring efficient heating. Made fr...
$34.92
In Stock
Microwave Door Interlock Switch Bracket
PartSelect #: PS3486543
Manufacturer #: WB14X10049
The door interlock switch bracket houses and supports the door switches.
$51.88
In Stock
MICRO SWITCH(STAND ON)
PartSelect #: PS1019163
Manufacturer #: WB24X10146
This door interlock switch is a safety-critical component designed for use in select microwave ovens. It prevents the appliance from operating when the door is open, ensuring safe and compliant functi...
$52.67
In Stock
LEVER SWITCH
PartSelect #: PS12170282
Manufacturer #: WB10X27080
Having trouble with your oven? We?re here to get it back in perfect working order just for you. If your Whirlpool oven rack has seen better days, our genuine OEM quality replacement is here to help. I...
$43.92
In Stock
Microwave Turntable Motor
PartSelect #: PS12722592
Manufacturer #: WB26X32190
This turntable motor is for microwaves.
The turntable motor rotates the glass tray inside the microwave oven.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge...
$59.47
In Stock
Microwave Turntable Motor Coupler
PartSelect #: PS8753744
Manufacturer #: WB06X10925
The turntable motor coupler connects the turntable motor to the turntable tray to rotate the tray.
$25.75
In Stock
ROTATING RING Assembly
PartSelect #: PS11736250
Manufacturer #: WB02X27104
Introduce an important component for your kitchen needs with the GE Rotating Ring Assembly. This high-quality product is an essential for the proper functioning of your microwave, aiding in evenly dis...
$49.58
In Stock
RANGE FOOT
PartSelect #: PS12170163
Manufacturer #: WB01X27076
Sold individually.
$24.11
Special Order
Questions And Answers for CEB1590SJ1SS
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the CEB1590SJ1SS
[Viewing 4 of 4]Door stuck closed
Fixed by
these parts
these parts
Show All
Won’t turn on
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Sparking
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
WHEN. YOU OPEN THE DOOR THE TURN TABLE WAS CONSTANTLY RUNNING
REPLACE SWITCH -STAND ON (NOT THE SWITCH-MONITOR) THERE ARE TWO OF THESE SWITCHES THE TOP ONE WAS DEFECTIVE.
THE ON OFF SWITCH BUTTON ON THE SWITCH WAS BROKEN
THE ON OFF SWITCH BUTTON ON THE SWITCH WAS BROKEN
Parts Used:
-
Moin from SCOTTSDALE, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave door was hard to open
1. Take out the case by unscrew 8 screws on the back and side of the case
2. Take out the control panel by unscrew 1 screw on the top and slide up
3. Take out the latch by unscrew 2 screws, and slide out 3 electric switches that clipped on the latch
4. Clip the switches onto the new latch
5. Slide in lever switch into ... Read more latch
6. Put back the latch
7. Put back the control panel
8. Put back the case
2. Take out the control panel by unscrew 1 screw on the top and slide up
3. Take out the latch by unscrew 2 screws, and slide out 3 electric switches that clipped on the latch
4. Clip the switches onto the new latch
5. Slide in lever switch into ... Read more latch
6. Put back the latch
7. Put back the control panel
8. Put back the case
Read less
Parts Used:
-
Henry from NORWALK, CT
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
75% of the buttons stopped working
1. Remove/unplug microwave
2. Remove microwave cover using torx security bits and sliding backwards then lifting off.
3. Unplug and note location of all electrical connections on control board (taking a picture is a good idea)
4. Remove the one Phillips head screw at the top of the control panel.
5. Lift up and remov ... Read more e control panel.
6. Replace with new control panel by positioning slightly higher to engage bottom tabs and pressing down.
7. Replace Phillips head screw at the top of the control panel.
8. Reconnect all electrical connections.
9. I like to plug it in and test for functionality here. CAREFUL OF OPEN ELECTRICAL COMPONENTS!
10. Replace cover by placing slightly behind front cover and sliding forward then replace all screws. NOTE: make sure all edges are secured.
11. Plug in and replace microwave.
2. Remove microwave cover using torx security bits and sliding backwards then lifting off.
3. Unplug and note location of all electrical connections on control board (taking a picture is a good idea)
4. Remove the one Phillips head screw at the top of the control panel.
5. Lift up and remov ... Read more e control panel.
6. Replace with new control panel by positioning slightly higher to engage bottom tabs and pressing down.
7. Replace Phillips head screw at the top of the control panel.
8. Reconnect all electrical connections.
9. I like to plug it in and test for functionality here. CAREFUL OF OPEN ELECTRICAL COMPONENTS!
10. Replace cover by placing slightly behind front cover and sliding forward then replace all screws. NOTE: make sure all edges are secured.
11. Plug in and replace microwave.
Read less
Parts Used:
-
James from Decatur, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!