Models > CE206SP2D0

CE206SP2D0 Frigidaire Cooktop - Overview

Sections of the CE206SP2D0

[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Drip Bowl - 8" – Part Number: 316048413
Drip Bowl - 8"
★★★★★
★★★★★
(100)
PartSelect #: PS437595
Manufacturer #: 316048413
This chrome drip bowl is designed for use with electric cooktops and ranges. This drip bowl is sold individually. At the widest point this part has a diameter of approximately 10 inches. It sits benea...
$12.59
  In Stock
Chrome Drip Bowl - 6" – Part Number: 316048414
Chrome Drip Bowl - 6"
★★★★★
★★★★★
(78)
PartSelect #: PS437596
Manufacturer #: 316048414
The drip bowl catches grease and spills that come from cooking on your stove top. They are located under the heating elements. Drip bowls are often neglected and can become rusted and cracked. If your...
$7.46
  In Stock
Terminal Block Kit – Part Number: 5303935058
Terminal Block Kit
★★★★★
★★★★★
(37)
PartSelect #: PS470125
Manufacturer #: 5303935058
This part connects the wire harness to the surface element and is used for ranges. The kit includes interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing, and wires. If y...
$16.24
  In Stock
Surface Element - 8 Inch - 220V – Part Number: 316442300
Surface Element - 8 Inch - 220V
★★★★★
★★★★★
(23)
PartSelect #: PS2339241
Manufacturer #: 316442300
If the burner element on your range will not heat up, or is damaged, it may need to be replaced. This part is 8 inches in diameter, and should not be confused with the smaller 6-inch model. The part i...
$34.52
  In Stock
Surface Element - 6 Inch – Part Number: 318372210
Surface Element - 6 Inch
★★★★★
★★★★★
(9)
PartSelect #: PS2582086
Manufacturer #: 318372210
This part is sold individually. This is a part for your stove top. The surface element is what your cookware sits on. The element supplies heat at varying temperatures. This may need to be replaced if...
$35.48
  In Stock
Light Bulb – Part Number: 316538904
Light Bulb
★★★★★
★★★★★
(11)
PartSelect #: PS12751166
Manufacturer #: 316538904
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If...
$19.73
  In Stock
Burner Switch Kit – Part Number: 5303935086
Burner Switch Kit
★★★★★
★★★★★
(8)
PartSelect #: PS470145
Manufacturer #: 5303935086
This is a burner switch kit, also known as the surface element control switch repair kit, for ranges. This burner switch kit sends voltage to the surface element coil and it controls the stove top sur...
$40.14
  In Stock
Burner Knob – Part Number: 5303285939
Burner Knob
PartSelect #: PS460848
Manufacturer #: 5303285939
Sold individually.
$66.76
  Special Order
KNOB-THERMOSTAT – Part Number: 5303285940
KNOB-THERMOSTAT
PartSelect #: PS460849
Manufacturer #: 5303285940
$79.68
  Special Order
End Cap - Black - Right Side – Part Number: 5303285855
End Cap - Black - Right Side
PartSelect #: PS460818
Manufacturer #: 5303285855
$53.12
  Special Order
Backguard End Cap - Black - Left Side – Part Number: 5303285854
Backguard End Cap - Black - Left Side
PartSelect #: PS460817
Manufacturer #: 5303285854
$53.72
  Special Order
ELEMENT-BAKE – Part Number: 5303285965
ELEMENT-BAKE
PartSelect #: PS460864
Manufacturer #: 5303285965
$375.98
  Special Order

Questions And Answers for CE206SP2D0

Be the first to ask our experts a question about this model!

Common Symptoms of the CE206SP2D0

[Viewing 3 of 3]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Old pans/bowls were corroded
Very easy---simply unplug the burners, remove the old pans and replace with the new ones

I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should!
Parts Used:
Chrome Drip Bowl - 6" Drip Bowl - 8"
  • John from Nisswa, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
48 of 53 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
High heat reluctant to turn down.
Most of the job is simple fastener mechanics.
Use a nut driver or Phillips screwdriver. Remove rear panel.

Pull out control knob. If it is stuck, wrap a small rag around the back of it and pull the rag steadily.

Carefully match marked terminals on the replacement switch with those on original. Switch terminals may not be in the same location. Replace wires one for one, one at a time.

Carefully select the correct knob filler for the switch post. Several are supplied. Proceed with logic and measure the shaft length and the filler length and type to match.
Parts Used:
Burner Switch Kit
  • George from New Port Richey, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
45 of 49 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
corroded terminals
was more of a job of splicing wires together than anything else. Loved the heat shrink electrical tubing
to put over the wires for insulation. used a hair
dryer. must buy more of that amazing stuff
Parts Used:
Terminal Block Kit
  • Gary from hollywood, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
22 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!