CDU300CP1188321W Caloric Dishwasher Parts & Repair Help | PartSelect
Models > CDU300CP1188321W

CDU300CP1188321W Caloric Dishwasher - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(6)
PartSelect #:PS12349731
Manufacturer #:W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this sc...
$11.00
In Stock
(5)
PartSelect #:PS11753384
Manufacturer #:WPW10348409
Sold individually.
$6.29
In Stock
(1)
PartSelect #:PS1731746
Manufacturer #:R9800670
Includes 2 screws.
$4.07
In Stock
(2)
PartSelect #:PS11741002
Manufacturer #:WP31986601B
This switch is for the oven light and downdraft fan.
$38.17
In Stock
PartSelect #:PS5573993
Manufacturer #:W10542232
No Longer Available
PartSelect #:PS11744050
Manufacturer #:WP74004005
This screw is well under an inch long, and is made of metal.
$4.54
In Stock
PartSelect #:PS11731323
Manufacturer #:W10856125
Sold individually.
$4.30
In Stock
PartSelect #:PS11743796
Manufacturer #:WP696392
$4.31
In Stock
PartSelect #:PS2017090
Manufacturer #:2045-0006
This tub baffle is two inches long. It is all black in color and is made entirely of plastic. This baffle is intended for use with some dishwashers.
No Longer Available
PartSelect #:PS2017089
Manufacturer #:2045-0005
No Longer Available
Questions and Answers for CDU300CP1188321W
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the CDU300CP1188321W

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Both fan and light switches were broken.

Rocker Switch – Part Number: WP31986601B
  • Customer: Peter from Media, PA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 18 of 22 people found this instruction helpful
TURN OFF POWER TO RANGE AT FUSE BOX -- a)Open the oven door, b) Unscrew the left and right silver nuts (not the black screws)that are in the oven under the control panel, c)pull off the four control knobs on the control panel, d) gently tilt out the control panel, e) set the control panel in/on the protruding arms, f) pull off THE connectors at the back of t... read more

Two upper rack rollers were broken

WHEEL – Part Number: W10542232
  • Customer: Duane from Seattle, WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
Used ascrewdriver to bend the metal rail that the roller rolls on. The part that needed to be bent holds the end cap on. Once bent, the end cap pops off. The the old roller can be removed and the new roller instsalled. The rail then needs to be re-bent. read more

Upper rack roller cracked then broke

WHEEL – Part Number: W10542232
  • Customer: Jeffrey from Wilson, NC
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
First removed the end cover and clip on the end of the rack slide. Used a flat head screwdriver to push in the clip and carefully pried it out. Then using the same screwdriver, pried up on the rack roller clip attached to the dish rack. Once clip was free of the rack, slid the rack roller off through the front of the slider. Slid the new rack roller into... read more