CC148 (2014) Cub Cadet Tiller - Overview

This fuel tank assembly stores fuel and sends it to the engine on compatible trimmers, tillers, and edgers, it includes the tank, fuel cap, and fuel lines, replace it if the tank is cracked or the lines are worn and leaking, drain the fuel and let the engine cool before repair, check the equipment model before ordering.

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

Presenting the Craftsman Clutch Assembly kit ideal for your lawn and garden equipment. This assembly plays a crucial role in engaging and disengaging the drive shaft ensuring effective and efficient operation of your equipment. The kit potentially includes multiple parts -- you can refer to your parts diagram to learn about every piece in...Read morecluded in the set. Before you start with the installation of this part ensure you're working in an area with good ventilation. It's advised to drain your equipment's fuel tank and disconnect the spark plug wire prior to the repair process enhancing safety and ease of installation. Don?t forget to wear work gloves to safeguard your hands during the repair.

Presenting the Craftsman Clutch Assembly kit ideal for your lawn and garden equipment. This assembly plays a crucial role in engaging and disengaging the drive shaft ensuring effective and efficient operation of your equipment. The kit potentially includes multiple parts -- you can refer to your parts diagram to learn about every piece in...Read morecluded in the set. Before you start with the installation of this part ensure you're working in an area with good ventilation. It's advised to drain your equipment's fuel tank and disconnect the spark plug wire prior to the repair process enhancing safety and ease of installation. Don?t forget to wear work gloves to safeguard your hands during the repair.

This is a replacement part sourced directly from the manufacturer for Craftsman trimmers and edgers. The fuel cap prevents fuel from spilling out of the fuel tank by covering the opening on the fuel tank. To install the fuel cap requires no tools, simply twits it into place. This part is made of plastic and is sold individually.

This is a genuine manufacturer-sourced component which is specially designed for use with lawn and garden equipment. It is an identical replacement for a missing or a faulty flex shaft that was installed on a new unit. The part helps to drive the unit. Please make sure to refer to the appropriate diagrams of your model for the correct loc...Read moreation and application of this part. Keep in mind this high-quality shaft is made of durable metal and is sold individually.

This genuine OEM supplied part is specially designed for use with a variety of lawn and garden equipment. It is a standard hardware which may have multiple applications. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct application of this part. This is an identical replacement for ...Read morea missing or a damaged flange lock nut that was installed on a new equipment. One durable metal part is included. A wrench will be needed to secure or remove this hardware.

The Push Cap Rod is a 1/2-inch metal metal cap which can be easily installed with a hammer and pliers. This manufacturer certified part comes in silver and is made of metal. This cap attaches onto an axle to help the wheel stay attached. If broken, the wheel will fall off and the part should be replaced.

This is a genuine replacement part sourced from the original manufacturer for use with tillers. The special gear box assembly is used to drive the tiller's tines and includes the axle and gears. This gear box assembly is available as an individual replacement part, please see model diagram for associative parts.

This tiller tine assembly is designed to dig into and break up soil, grass, and compacted ground on forward-rotating cultivators. Built from durable steel with an L-shaped profile, it helps turn and loosen soil efficiently for planting and garden preparation. Ideal for replacing a bent or worn tine, it restores proper tilling performance and smooth, consistent operation during regular use.