CAC59 Waring Blender - Overview

This is a genuine manufacturer sourced replacement part used on Waring blenders. It helps to distribute the pressure evenly and provides a tight seal for the bearing holder. It is installed along with other seals and washers underneath the cutter assembly, to prevent leaks from coming out of the bottom of the container. Over time these se...Read moreals and washers will become brittle and compressed, then will have to be replaced. For proper application please refer to diagrams of your unit. This part is made out of rubber material and it is sold individually. To complete this repair you will need a wrench.

This is a genuine manufacturer approved replacement part designed for use on Waring blenders. This item fills the center hole in the outer lid. It is made out of clear plastic and it is sold individually.

Genuine Waring replacement part, this item is sold individually. This part acts as a seal for the blenders shown below. It is installed along with other seals and washers underneath the cutter assembly, to prevent leaks from coming out of the bottom of the container. Over time these seals and washers will become brittle and compressed, then will have to be replaced.

It is a genuine OEM supplied replacement hardware that is specially produced for Waring blenders. This is the hex nut that is secured on the bottom of the blender jar. Please note one durable metal item is included per order.

This is a genuine manufacturer-sourced part which is specially designed for Waring blenders. The coupling spins on the motor shaft to rotate the blades. This part is made of metal and is sold individually. To install you will need a wrench and screw driver. Just unscrew the drive coupling from the bottom of the blade assembly and screw the replacement on the same way.

This part is available as an individual replacement. The jar is made out of plastic. When replacing this item no tools should be needed. It will need to be replaced if it becomes broken. This is an authentic Waring replacement part that is sourced from the original manufacturer for use with blenders.

It is a genuine OEM supplied component which is specially produced for use with Waring blenders. This replacement blending assembly is secured at the bottom of the container to cut the chop and cut the food. It is a complete kit which includes a durable stainless steel blade with the seals and the hardware needed to secure it. Over time t...Read morehe blade may become dull or it may bend if used incorrectly eventually requiring replacement. Please note this high-quality kit is sold individually.

This is an OEM replacement part for Waring blenders. The blade rotates on the drive shaft at a high speed, to cut the contents of the blender. This part is made of metal and is sold individually. This is also a common wear item, so we recommend ordering a spare. Be sure to wear work gloves and handle this part carefully while installing.

This is an original Waring Pro part. This Washer is used on many models of Waring blenders. The Washer is used as a spacer under the Drive Coupling and fits on the shaft of the motor. The washer needs to be replaced if it becomes lost or damaged in any way. The Washer is made of metal and is about a quarter inch in diameter. Tools used: • Screwdriver • Wrench

This is a genuine manufacturer sourced replacement part used on Waring blenders. It helps to distribute the pressure evenly and provides a tight seal for the bearing holder. For proper application please refer to diagrams of your unit. This part is made out of metal and it is sold individually.