CA18DLB General Electric Refrigerator - Overview

Diagrams for CA18DLB

See every part. Know exactly what you need.

Parts for the CA18DLB

$34.93

Evaporator Fan Blade Kit

★★★★★

(6)

Part #WR60X114

This kit features a 5-blade plastic evaporator fan blade that rotates CCW and measures 4.5-inches in diameter and has a 3/8-inch-tall shaft. This kit also has a metal compression ring that secures the fan to the evaporator. The evaporator mechanism is normally located in the freezer and is responsible for pulling the warmer air over the c...Read more

Read less

$175.96

Condenser Fan Motor

★★★★★

(2)

Part #WR60X177

This condenser fan motor operates in a clockwise fashion. The fan itself has two 1/4 inch spade terminals. It carries 2 watts and 115 volts. This motor NO longer comes with cover for terminals.

SWITCH LIGHT/LAMP PLUN

Part #WR23X10632

Thermostat Control Kit

Part #WR9X406

$51.61

USE GEH WR2X4978

Part #WR02X10479

$26.82

DISCONTINUED

Part #WR5X59

DISCONTINUED

Part #WR2X5811

DISCONTINUED

Part #WR13X515

Common Symptoms of the CA18DLB

How this model fails, and the parts that fix it.

Freezer section too warm

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Wouldn't cool

18 of 25 people found this instruction helpful.

Clarence from Great Cacapon, WV
Really Easy
15 - 30 mins
Socket set

I removed the 3 screws that held the motor and fan. Exchanged fan blades and reinstalled the fan and new motor

I was surprised to find the motor. The refrigerator/freezer was over 28 yrs old. Works fine now

Was this helpful?

Noisy Fan Motor - Bearing went out.

11 of 14 people found this instruction helpful.

Robert from Carpinteria, CA
Easy
1- 2 hours
Nutdriver

Moving the frig out and cleaning was the hardest part of this job - lots of dust collected over the 17 years the frig was in place. Once all the cleaning was done, with the frig out and back cover off (10 -12 screws taken off with nutdriver),I plugged the frig in and observed the the problem was a noisy fan motor. The motor is at the very ... Read more

Read less

Was this helpful?

Refridgerator was running constantly and condesor would get very hot, condesor fan would only turn on if I spun it.

8 of 9 people found this instruction helpful.

Raymond from Los Lunas, NM
Easy
15 - 30 mins
Nutdriver, Socket set

Unplugged fridge removed the three screws that held fan on to fan frame unplugged condensor fan removed brackets from old fan and put them on new fan installed new fan plugged in fridge and now it works great!

Was this helpful?