BVM215 Poulan Leaf Blower / Vacuum - Overview

This OEM Vacuum Bag holds grass and leaf clippings when the blower is switched to vacuum mode, and is attached to the exit port. It is constructed of white fabric. If broken due to wear/fatigue it will no longer be able to hold clippings and should be replaced. Refer to your make, model and diagrams to see if this is the right part for your machine.

This wire harness/switch kit is a genuine OEM replacement kit used with various electric leaf blowers. It includes the control switch, connector plug, terminals, and electrical wires. The control switch allows you to operate the equipment. The connector is responsible for joining the wires within the harness. The terminals connect the wir...Read morees to the switch, and the wires carry the electrical current. If any of the components in this assembly are faulty, you will likely experience issues with starting and running the leaf blower, or total equipment failure. To access the wire harness, remove the fasteners that secure the blower housing and pull the housing off. Carefully disconnect the wire harness and dispose of it appropriately. Place the new harness in position and connect the wires to the appropriate terminals. Ensure that the new harness is securely fastened before you begin operating the leaf blower.

This is an authentic item that is supplied by the original manufacturer for use with handheld electric blowers. It fits into the air inlet to enhance the blower function. This is an identical replacement for a missing or a damaged component that was included with a new unit. Check the owner's manual for the correct application of this par...Read moret. Keep in mind this high-quality inlet restrictor is made of durable plastic and is sold individually.

This is an authentic item that is supplied directly from the original equipment manufacturer for use with Weed Eater and Poulan electric backpack blowers. It is the special replacement nut that is used to secure the impeller, this part provides an identical replacement for a missing or damaged hardware originally installed on the new equipment. This is a high-quality metal component which is sold individually.

This is an authentic replacement part that is OEM sourced to be used with trimmers, blowers, and pruners from Poulan, Paramount, and Weed Eater. The metal screw is commonly used to secure the two halves of the handle set or trigger housing. The screws are sold individually and the amount of screws needed can vary based on the model of the equipment.