BM4CSSACC (090432504) Homelite Trimmer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No run on start up. sputters
Remove carb cover, remove 2 t25 torx head screws. ( they are loctite in so they may be difficult). flip up carb, install new carb. swap gas fill and return lines to carb. choke and start, go to work.
Parts Used:
-
MIKE from LOXAHATCHEE, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke my trimmer head trying to replace the string.
I was amazed I found this EXACT trimmer head that fit PERFECTLY and for a VERY REASONABLY PRICED!!!
I’ll be back as needed!
I’ll be back as needed!
Parts Used:
-
Dwight from Saint Charles, MO
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trimmer head worn out from normal use
Lay trimmer on bench so Phillips head screw on end of shaft just above trimmer head is up. Turn trimmer head until you see a gap open just below screw. Insert Allen wrench in gap. Hold in on Allen wrench with one hand while turning trimmer head to the right. Reverse threads lefty tighty ,righty loosey.
Parts Used:
-
Robert from WHARTON, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!