BM08570 Homelite Leaf Blower / Vacuum - Parts

This carburetor gasket is an OEM replacement part for use in a variety of lawn and garden outdoor equipment. It seals the area between the carburetor and the intake manifold to prevent air and fuel from leaking. Over time, the gasket may wear down, crack, or warp due to normal aging, exposure to heat and chemicals, or improper installatio...Read moren. A faulty gasket will cause air and fuel to leak, resulting in hard starting, rough idling, fuel wastage, and overall lower engine performance. To replace the gasket, remove the air filter cover, air filter, and carburetor. Carefully pull off the old gasket, and thoroughly clean the sealing surface of all residues. Place the new carburetor gasket onto the intake manifold, and firmly press it in place. Reassemble the equipment parts in reverse order to complete your repair.

Genuine OEM replacement part, this item is sold individually. This Fuel Cap is is on the fuel tank on the outdoor products shown below. This is a vented Fuel Cap. It includes a gasket inside the Cap.

This is an authentic OEM strap produced by the original manufacturer for backpack blowers. A waist strap is a load-bearing strap used to distribute the pack's weight over the whole body rather than just the shoulders. This black fabric strap includes a plastic buckle fastener and plastic slide adjusters. This part connects onto the frame. Note that harness, straps and back pad are sold separately.

This is an authentic replacement screw which is supplied by the original equipment manufacturer for use with handheld lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this item. This high-quality Torx screw is made of durable metal and it is sold individually.

This is an original replacement part manufactured for use with cultivators, blowers, and trimmers. The socket head screw is commonly used to secure the starter housing to the engine. This socket head screw is used with several types of equipment and can have multiple uses. This screw is available as an individual replacement part, please see model diagram for part location and usage.

It is a genuine manufacturer-approved replacement gasket which is specially designed for use with handheld lawn and garden equipment. This gasket provides an air-tight seal for the cylinder, over time it may become brittle and crack eventually requiring a replacement. It is made of high-quality composite material and it is sold individually.

This part is available as an individual replacement even though three may be needed. The tube clamp attaches to the elbow tube and the bellows. A set of pliers might be helpful during the installation of this item. It is made of metal and will need to be replaced if it becomes broken. This is a genuine OEM sourced part which is specially designed for use with Ryobi, Ridgid, and Homelite backpack blowers.

This is a genuine replacement part sourced from the original manufacturer for use with leaf blowers. The special air box base is used to link the carburetor and the air filter assembly. This air box base is available as an individual replacement part, please see model diagram for associative parts.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with blower/vacuums from Ryobi and Homelite. The metal nut is used with different types of machines and the application of the nut can vary based on the model of the equipment. This item is available as an individual replacement part.