BD4601G Ryobi Belt or Drum Sander - Overview

This is a genuine manufacturer-sourced component which is specially made for use with Ryobi belt and disc sanders. It is an identical replacement for a missing or a faulty work rest that was included with a new unit. The part acts as a support to rest the workpiece on. Please make sure to refer to the owners manual and the appropriate dia...Read moregrams of your model for the correct location and application of this component. Keep in mind this high-quality work rest is made of durable material and is sold individually.

This is a genuine Ryobi replacement part. It is sold individually. The belt is installed on the BD46076 Driven Pulley and the BD46015 Idler Pulley to drive the 4 x 36 Sanding Belt & 6 inch Sanding Disc on the Ryobi BD4600 Sander. To install the belt, start with the Idler pulley and align the cogs on the belt with the grooves on the pull...Read moreey. Don't put the belt all the way on the pulley just enough to so you can install it on the Driven Pulley. Then while rotating the belt and pulleys press the belt all the way on both pulleys.

This is an authentic Ryobi replacement part, sourced from the original manufacturer for use with belt and disc sanders. The washer is used to disperse pressure put on the tool rest by the bolt used to secure the rest across a wider surface area. The washer is sold individually, please note two are required.

This authentic Ryobi switch is specially designed for belt and disk sanders. It is sourced directly from original manufacturer and it is sold individually. This is the switch that turns the unit on and off. It comes with a plastic key which when pulled out will prevent anyone from using the tool. Switches have mechanical components that o...Read morever time will wear out, requiring switch to be replaced. Replacing this switch is fairly easy and you should only need a screwdriver. • Remove screws from the switch guard • Remove old switch and secure new one in place • Reassemble and test the equipment

This is an OEM part sourced directly from the manufacturer. The start relay is found in Ryobi belt and disc sanders. This part is an electronic component made of high-quality plastic and metal, and is connected to the wire connection box or switch box. You will require a screwdriver when replacing this item. This product is provided as an individual replacement part.

This is a Genuine OEM replacement part designed for Ryobi Belt and Disc Sanders. This round sanding disc is located on the side of the belt/disc sander. It is made out of Abrasive Minerals with paper backing. This Sandpaper Disk is Sold Individually. To replace this item you would need a Screwdriver. • Unplug the belt/disc sander • ...Read more Remove the backing from the sanding disc • Align perimeter of sanding disc with plate and press firmly into position • Position disc guard against the lower one-third of the disc, aligning holes • Using the two phillips head screws, securely tighten the disc guard into place

This is an authentic Ryobi replacement part that has been sourced from the original manufacturer to be used with belt and disc sanders. The plastic guard is used to house and protect the machine's power switch assembly. This item is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine OEM approved replacement item made for use with Ryobi and Ridgid power tools. Please refer to appropriate diagrams to ensure correct application of this item. The bearing is designed to reduce friction between rotating parts. It also allows part to move freely. Includes one (1) ball bearing per order.