BCA850 (28) Husqvarna Workwear - Overview

This 25mm blade nut is a fastener that secures the blade to the spindle or shaft of your lawn equipment. It is located at the center of the blade. Signs of a broken blade nut include looseness, stripping, cracks, or excessive wear. Failing to replace a broken blade nut can result in a loose or dislodged blade during operation. To unthread...Read more the blade nut on your machine, use a wrench or socket to loosen it. This OEM component is sold individually. To ensure you have the correct number of blade nuts for your machine, refer to the user guide as your equipment may require multiple blade nuts. Consider replacing all of the nuts in one go as they wear out at similar rates.

This is a high-quality replacement for a missing or a faulty support cup that was installed on a new unit. The component helps to provide support for the #544359101 Transport Guard which is sold separately. It is designed for use with Husqv...Read morearna and Jonsered brushcutters. Make sure to check the owners manual and the appropriate diagrams of your model for the correct application of this part. Note, this support cup is made of durable metal with rubber and is sold individually.

This OEM locking pin is found in your handheld lawn equipment to hold a part, such as a cutting head, spool, or guard, in place and keep it from coming in loose while you are using your machine. If the pin is broken, the component it is supposed to be securing will become wobbly and loose, which can cause your machine to malfunction. To r...Read moreemove a broken locking pin, you can use pliers or a small screwdriver to pull it straight out of the hole. If the pin is stuck, you may need to wiggle it back and forth gently while pulling on it. Take into consideration that this part is sold individually, so refer to your instruction manual to confirm how many of these pins your machine will need.

This threaded plug bolt is a precision-designed component used to securely seal lubrication ports in gear housing assemblies on outdoor power equipment. Engineered with durable, corrosion-resistant material, it helps retain essential grease while preventing dirt, moisture, and debris from entering sensitive internal components. Its thread...Read moreed design ensures a tight, vibration-resistant fit, supporting long-lasting performance and proper gear protection. Ideal for maintenance or repair, it helps preserve smooth operation and extend the life of gear-driven systems.

This clamp is a sturdy fastening component designed to securely hold and stabilize parts within outdoor power equipment assemblies. Commonly positioned near the gear housing or guard area, it helps keep components tightly in place under high vibration and demanding operating conditions. Made from durable, wear-resistant material, it suppo...Read morerts proper alignment and prevents shifting that could lead to damage or reduced performance. Ideal for replacing worn or weakened clamps, it helps maintain structural integrity and reliable operation during extended use.

This bevel gear repair kit is designed to restore proper rotation and performance in outdoor power equipment by replacing worn internal gears within the gear head assembly. Featuring a durable gear set with a 1:1.4 ratio, it helps ensure smooth power transfer to the cutting attachment for efficient operation. Built for reliability, it pro...Read morevides a cost-effective solution for repairing grinding or non-spinning heads, allowing you to maintain consistent performance without replacing the entire gear housing.