This OEM nut is a 5mm, gold, metal nut, which is sold individually. It can be installed with a Wrench or Socket and Torque Wrench by torquing to the manufacturer specifications. This nut is used to secure another part in place, and should be replaced if damaged due to fatigue (such as damaged threads or rounded ends).
This nut can have v...Read morearious uses on various equipment, and as such the difficulty of the installation can vary, but generally this is an easy repair.
This fuel cap assembly is a genuine OEM part and is designed for use with outdoor handheld power equipment. Replacing your fuel cap is as simple as removing the old one and screwing the new cap on. This fuel cap keeps the fuel within the tank during operation, preventing leaks, and ensures that no dirt or debris enter the carburetor, filt...Read moreer, fuel lines or engine. Made of plastic with a cork seal underneath, this fuel cap is sold as an individual part, and has an approximately 2-inch diameter.
This individually sold fuel gasket is designed for use with handheld lawn and garden equipment and is the seal for the gas cap. This gasket is a genuine OEM part made of a composite material and will eventually become brittle because it interacts with gas and oil, meaning it will need replacing before it becomes debris in the fuel tank. T...Read morehis gasket not only prevents debris from entering the fuel tank, but it also prevents any leaks. To replace, simply unscrew your gas cap and remove the old gasket from the cap, and then replace it with the new.
The manufacturer certified Foam Air Filter is a black, foam part, used to filter out contaminents from entering the carburetor. It attaches in the air cleaner housing, is rated as "Easy" to install, and requires a screw driver (Tip: put a bit of two-cycle oil in the bag, and let it absorb into the filter). If the part wears out, the engin...Read moree will burn more fuel and you will have noticably less power because it will be starved for air. If this happens, the part must be replaced. Refer to your make, model and diagram to ensure this air filter is correct for your machine.
This OEM Hex Socket Bolt is a black, 5x12mm, individually sold, metal part. A Hex Socket and Torque Wrench can be used to secure the part in place by torqueing to the manufacturer specifications.
The part must be replaced when damaged (likely due to fatigue), for example if it is rounded off, has stripped threads, or is missing altogether.
This is a genuine Shindaiwa part made to fit brushcutters and water pumps. Two flexible straps attach the fuel tank to the main body of the machine. There are channels which hold the straps into place, securing the fuel tank. Two metal hinges are attached to each end of the strap. This listing is for one strap.
This is a genuine replacement part manufactured for use with lawn and garden equipment. The starter pawl return spring returns the starter pawl to its normal position after pulling the starter rope. If the pawl spring wears out the pawl will remain engaged witht the starter pulley. The starter pawl return spring is sold individually.
This spark plug cap is a genuine OEM sourced replacement part that is commonly utilized on Shindaiwa lawn and garden equipment. It is used to connect the spark plug to the ignition wire. Please note this durable rubber part is sold individually.
This is a genuine manufacturer sourced replacement washer that is designed for use with Shindaiwa and Echo handheld lawn and garden equipment. It helps to distribute the pressure evenly between two connected parts, for proper application please make sure to check appropriate diagrams of your unit. This part is made from durable metal and it is sold individually.
This replacement spring washer is a genuine OEM hardware that is commonly utilized on Shindaiwa and Echo lawn and garden equipment. It has multiple uses depending on the equipment, for correct location and application for this party please make sure to check appropriate diagrams for your equipment. Please note this durable metal spring washer is sold individually.