This OEM Nut is a silver, metal, individually sold part. It can be installed using a wrench or socket by torquing to the manufacturer specifications.
This part may become damaged over time due to fatigue, which will result in damaged threads or rounded off edges. If damaged it should be replaced. Check your owners manual to see if this...Read more is the correct part for you, as this part can be applicable to a long list of equipment.
The difficulty of this part installation varies depending on its application, but it genuinely should be an easy repair.
Genuine Shindaiwa replacement part, this item is sold individually. The Eyelet is installed in the spool housing of the Trimmers shown below. Most of the Trimmers are dual line, so two Eyelets are required. The Eyelet creates a smooth surface for the cutting line to exit the spool.
This fuel cap assembly is a genuine OEM part and is designed for use with outdoor handheld power equipment. Replacing your fuel cap is as simple as removing the old one and screwing the new cap on. This fuel cap keeps the fuel within the tank during operation, preventing leaks, and ensures that no dirt or debris enter the carburetor, filt...Read moreer, fuel lines or engine. Made of plastic with a cork seal underneath, this fuel cap is sold as an individual part, and has an approximately 2-inch diameter.
The manufacturer certified Foam Air Filter is a black, foam part, used to filter out contaminents from entering the carburetor. It attaches in the air cleaner housing, is rated as "Easy" to install, and requires a screw driver (Tip: put a bit of two-cycle oil in the bag, and let it absorb into the filter). If the part wears out, the engin...Read moree will burn more fuel and you will have noticably less power because it will be starved for air. If this happens, the part must be replaced. Refer to your make, model and diagram to ensure this air filter is correct for your machine.
This OEM Clip is a silver, steel part, which is sold individually. The part secures the fuel line to the fuel filter and is rated as Easy to install.
You will know you need a new one if there is a leak around the hose where this clip is used to secure it, or if the fuel line detaches.
This authentic part is designed for Shindaiwa handheld trimmers. It is supplied directly from the original equipment manufacturer. The button is pressed on the ground to extend the cutting line from the spool. It is an identical replacement for a damaged or a missing component that was installed on a new unit. To ensure the correct instal...Read morelation of the new part, refer to the appropriate diagrams of your model. One durable plastic button is included. To perform this repair no tools would be needed, remove the old and secure the new one.
This is an authentic Shindaiwa replacement part that has been sourced from the original manufacturer to be used with trimmers. The plastic spool is used to store trimmer line within the cutting head assembly. This item is sold as an individual replacement part, please note tools may not be needed to install the spool.
The spring goes between the spool and the housing and is available individually. If this part becomes broken or bent it will need to be replaced. During installation, a wrench may be needed to replace the metal spring. This is an authentic replacement part sourced from the original manufacturer for use with Shindaiwa brushcutters and trimmers.
This item has been sourced from the original manufacturer and is intended to be used with trimmers and brushcutters from Shindaiwa. The durable plastic cap is used to support the spool and bump. This item aligns with the tabs on the housing and secures the spool within the housing. This item is available as an individual replacement part.
This is a genuine Shindaiwa part made to fit brushcutters and water pumps. Two flexible straps attach the fuel tank to the main body of the machine. There are channels which hold the straps into place, securing the fuel tank. Two metal hinges are attached to each end of the strap. This listing is for one strap.
This replacement spring washer is a genuine OEM hardware that is commonly utilized on Shindaiwa and Echo lawn and garden equipment. It has multiple uses depending on the equipment, for correct location and application for this party please make sure to check appropriate diagrams for your equipment. Please note this durable metal spring washer is sold individually.