This Primer Bulb is a clear, plastic, individually sold part with an Outer Diameter of 0.720 inches (18.30 mm) and a Height of 0.674 inches (17.12 mm). With Flange: 0.842" (21.40 mm). This part is rated as Easy to install by customers, and attaches to the primer pump assembly.
If the part shows signs of breakage, such as cracks appearin...Read moreg due to the bulb drying out, or fatigue, then it must be replaced. Refer to your owners manual/model number to ensure you are choosing the correct part.
This OEM Fuel Filter is a white and silver, steel part, sold individually. It requires a pair of pliers to install and is ranked as Easy to repair by our customers. This part attaches inside of the fuel tank, and is used to clean the fuel of debris.
This part should be changed regularly as part of good engine maintenance. If the engine ...Read moresounds like it is not getting enough fuel or is underperforming, remove the filter to heck for a blockage. If there is a blockage or the part is leaking, then it likely needs a replacement.
Used in over 150 models of outdoor power equipment, this clip is commonly used to clip fuel lines or other hoses/tubes in place. It is sold individually, not as part of a kit or assembly, made of metal, and is silver in color.
When this clip becomes damaged or worn, it can no longer support the fuel line, which may cause a fuel leak and...Read more/or smell. This wear will occur as part of regular use of your equipment. To complete this repair, you will need a wrench, screwdriver, and pliers. It is found in a variety of locations depending on your model; please refer to your owners manual for the exact location.
Customers rated this repair as Easy.
This replacement screw is specially designed for use with Echo handheld lawn and garden equipment. It is a high quality OEM sourced item, not an aftermarket imitation. This screw is a standard hardware which has multiple uses depending on the equipment. Please note, this hex socket head screw is sold individually.
Also refered to as a Collar, this part is sourced directly from the manufacturer for use with lawn and garden equipment. The collar fits between the top guard and the engine cover. It is sold individually, it is not part of a kit or an assembly. It is made of durable black plastic and can become worn with regular use.
The exact location...Read more varies from model to model; refer to your owners manual to determine the location on your machine. No tools are required to complete this repair, and it should be replaced when it is missing or damaged.
Customers rated this repair as easy.
The Spacer is a silver, metal part, which is rated as "Easy" to install. It can be attached between the bearing and oil seal in the gear box, to provide spacing between these parts. If broken, damaged or worn it should be replaced. Refer to your make, model and diagram to ensure this is the correct part for you.
This screw is a standard hardware commonly utilized on Echo handheld lawn and garden trimmers and edgers. It is sourced from original equipment manufacturer and it is generally used to secure the plastic muffler cover. Please note this high quality Torx screw is sold individually.
This is a genuine replacement part manufactured for use with lawn and garden equipment. The starter pawl return spring returns the starter pawl to its normal position after pulling the starter rope. If the pawl spring wears out the pawl will remain engaged witht the starter pulley. The starter pawl return spring is sold individually.
This manufacturer-supplied screw is made for use with Murray and Simplicity riding lawn mowers and garden tractors. It is an identical replacement for a missing or a damaged screw that was installed on a new equipment. The screw has a few applications on the purge base. Refer to the appropriate diagrams for your model to ensure the exact ...Read morelocation and the correct application of this hardware. This high-quality part is made of durable metal and is sold individually. A screwdriver will be needed to secure or remove it.
t is an authentic replacement bearing that is supplied by the original equipment manufacturer for Shindaiwa and Echo lawn and garden equipment. Needle bearings are used to reduce friction between rotating parts. The rollers take the load and spin, distributing the weight evenly while the minimal contact area of the roller reduces friction...Read more. Symptoms of a failing bearing may include squealing, screeching, and an entirely new type of grinding noise. This high-quality component is made of durable metal and is sold as an individual part. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.
This fuel tank cap connector is an authentic OEM replacement part supplied by the manufacturer. It is compatible with over 150 models of machinery such as blowers, edgers, and trimmers. This part connects the cap of the fuel tank to the fuel tank itself. It is made of plastic, and it should be replaced if it is damaged. No tools are needed to replace this part.
This single-row, deep-groove ball bearing is sized at 12x32x10mm and is made of durable metal. It is used to reduce friction and vibrations when it is in between two parts that are rotating or moving against each other. This bearing can handle forces that are applied to it up-and-down and sideways, also known as radial and axial loads. It...Read more is easy to install and can handle high rotational speeds without causing too much vibration or making much noise. Over time, this ball bearing wears out from heat and pressure and starts to fail. If the engine of your machine has been run without oil in the gas tank, this ball bearing can seize. In these situations, you will need to replace the ball bearings. Otherwise, you will notice that your machine overheats, works harder because of the increased friction it is handling, and produces excessive vibration and noise. To extract a ball bearing from your machine, you will need to insert a flat-head screwdriver through the bearing opening and against the seal. Then, tap the seal out with a mallet. Afterwards, slot a socket through the diameter of the bearing, and tap the entire bearing out of its place by again using a mallet. This authentic OEM part is sold individually, so be sure to refer to your user manual to verify how many bearings your machine needs and where they are in it.