B130A (968999379 - 2008-10) Bluebird Aerator - Overview

Tine, Aerator

This genuine OEM bearing flange is 4 inches long and 2.5 inches wide. The flange is used to secure bearings (sold separately) to provide support moving parts in aerators, such as the rotating shafts/axles. Each bearing in your aerator requires two flanges each. This protects the parts from friction damage and allows them to spin smoothly....Read more The flange also helps to secure the bearing in place and prevent it from coming loose or falling inside the equipment. You will need to replace your flange bearing if your equipment is making grinding noises during use or if the flange is corroded, or chipped. Each flange is sold individually.

This is a genuine OEM bearing which is designed for use with lawn and garden equipment and is sold individually. Made of high-quality metal and measuring at a 1-inch inner-diameter, this bearing will likely need to be replaced often because it is a high-wear part. This bearing is used to distribute weight evenly using small inner balls wi...Read morethin the bearing itself, and the locking collar fastens the bearing onto the shaft to reduce movement from motor vibrations. If you are unsure of how many bearings your equipment will need, make sure to check any available diagrams.

This steel bearing is an OEM replacement for aerators and has a .75-inch inner-diameter. Bearings have tiny balls within them which are used to distribute weight evenly and minimize friction between two moving parts. It is sold individually but comes with a .75-inch inner-diameter locking collar as well, although a stamping kit is sold se...Read moreparately. The locking collar is used to tighten the bearing on the shaft, to reduce the effects of vibrations during operation, like slipping. It is made of high-quality metal but is considered a high-wear part meaning it will likely need to be replaced often.

This flange bearing is a genuine part from the original equipment manufacturer for use with aerators to secure the bearing within the rotor mechanism. This part comes with two flange bearings and the necessary hardware to secure it within your equipment. For exact positioning with your equipment model, refer to any diagrams or user manuals.

Sourced directly from Bluebird, this is an exact replacement part for various Bluebird Aerators. It is made of black metal, is 51.5 inches long, and is sold individually. When you notice the chain is wearing, corroded, damaged, or broken, you will need to replace it. Refer to your owners manual to determine the location of the chain.

It is a genuine item that is supplied by the original equipment manufacturer for Bluebird aerators. This is an identical replacement for a missing or a faulty chain idler sprocket that was installed on a new unit. It is an important component that helps to transfer the motion. Please make sure to refer to the appropriate diagrams of your ...Read moremodel for the correct location and application of these parts. Keep in mind this high-quality kit is sold individually. Note, it includes the sprocket, the screw, three washers and a nut.

This durable wheel is designed for use with lawn and garden aerators and sod cutters, providing smooth mobility and reliable performance. Measuring 10 inches in diameter and 3 inches in width, it features a sturdy metal rim paired with a high-quality rubber tire for long-lasting durability. The wheel ensures easy transportation and operat...Read moreion of your equipment, making it an essential component for maintaining efficiency. Installation is straightforward—simply replace the existing wheel with this complete assembly for a secure fit.

This V-Belt is sourced directly from Bluebird for use in Aerators. It is responsible for driving the jack shaft, is made of black rubber, and is sold individually. When it is wearing or broken, it will slip on the shafts or will be no transfer of power to the drive pulley. Inspect the belt for signs or wear or damage, replacing if necessary. Customers rate the difficulty of this repair as Medium.

This Clutch Cable is designed for use in various models of Bluebird Aerators and is sourced directly from Bluebird. It is sold individually, black in color, and made of metal with a rubber coating. When the Clutch Cable is malfunctioning, you will no longer be able to control the clutch. Inspect the cable for signs of fatigue, wear, or ...Read morestretching, replacing the part if needed. You will need pliers to complete this repair. Customers rate this repair as Easy.

Used in various Bluebird aerators, this OEM replacement part is used to drive and engage multiple parts on your aerator. It is not part of a kit or assembly and is sold individually. This part is designed to be replaced quickly and inexpensively. They should be replaced as soon as you notice any signs of wear or damage. Refer to your owners manual to determine the exact location on your model.

This genuine decal (Decal, Bluebird w/Logo 15.5") is 15.5 inches, and made of a clear sticky paper.