AYP1184A69 (1996) Husqvarna Lawn Tractor - Overview

This replacement v-belt is a genuine OEM sourced part. It is specially manufactured for use with riding lawn mowers. This is the the belt that is attached to the transmission pulley helping to drive the unit. Over time belts tend to wear out and stretch eventually requiring replacement. Inspect belts periodically and replace them as neede...Read mored to maintain peak performance. This part is made out of strong rubber material and it is sold individually. To complete this repair you will need a set of wrenches.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Craftsman lawn and garden equipment. This is an identical replacement for a missing or a faulty tractor lift assembly link that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the cor...Read morerect location and application of this component. This high-quality assembly is made of durable metal and is sold individually, keep in mind the hardware to secure it is sold separately.

The washer goes between the center lock nut and the steering wheel. This item is available as an individual replacement part. It is an OEM from Poulan, Husqvarna, and Weed Eater for use in lawn tractors and ride mowers. When replacing this item a wrench might be required during the installation process. This part is made out of metal and will need to be replaced if it bends or breaks.

This link lift is an original part from Weed Eater, Ryobi and Poulan for lawn tractors and lawn mowers. This part connects to the front of the mower deck and to the bracket underneath the front axle. It is recommended to review your models diagram to verify the parts compatibility.This link lift is sold individually and made of metal.

This nylon bearing is a genuine OEM part used for various makes and models of tractors and lawn mowers and is sold as an individual part. Measuring 0.5-inches tall, this bearing is used to secure the roll pin to the pedal cover and will require a wrench when you replace it.

This part is an OEM from Husqvarna, Poulan and Weed Eater for use with Lawn Tractors. The drive pulley attaches to the transmission and drives the transmission shaft to move the tractor. The most common reason for replacing the pulley is when it is broken or worn, causing the blades to not turn. This part is sold individually. The tools that you will need to replace the pulley is a 5/8" socket and a pipe wrench.

Genuine Manufacturer Approved Carriage Bolt is a standard part that fits a variety of products. This part is sold individually and the Nut is not included. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the bolt and keeps it from turning when the nut is tightened.

This item is available as an individual replacement part. The knob attaches to the shift rod and is made out of plastic. During replacement, no tools should be needed to install this part correctly. It will require replacing if it breaks or strips. This genuine item is supplied by the original equipment manufacturer for use with tractors and lawn mowers made by Poulan, Husqvarna, Weed Eater, and Jonsered.

This is an authentic replacement part sourced directly from the manufacturer. The hardened washer is made of metal, and is compatible with many lawn and garden tools. This item distributes even pressure over the surface and provides a solid grip for the bolt or screw. This part is sold individually. A screwdriver and a wrench are often needed to make the proper removal and replacement.

This is an original replacement part manufactured for use with riding lawnmowers. The washer is used with several different models of lawnmowers and has multiple applications depending on the model of the mower. This washer is available as an individual replacement part, please see model diagram for part location and usage.

This deflector rod is an original part from Craftsman for lawn tractors and mowers. This part connects to the deflector shield and allows the deflector shield to swivel down and up. You will need a socket set and wrench set to replace this deflector rod. This deflector rod is made of metal and sold individually.

It is a high-quality sector gear which is supplied by the original equipment manufacturer for use with riding lawn mowers and garden tractors. This is an important component of the steering mechanism. Over time parts will wear out and may begin to fail eventually requiring a replacement. Keep in mind this sector gear is made of durable me...Read moretal and is sold as an individual item. Note, the hardware to secure it is sold separately. A wrench set might be needed to perform this repair. Refer to the diagrams for your model to ensure the proper replacement procedure.