AYH LG Air Conditioner - Overview

This black cross flow fan, also known as an evaporator fan blade, circulates air across the evaporator or condenser coils in your air conditioner to help cool the room. It is typically located within the unit. To identify a broken cross flow fan assembly, look for a few signs. First, you may notice reduced or no airflow from the air condi...Read moretioner. Second, listen for unusual noises like rattling, grinding, or squealing coming from the fan. Finally, inspect the fan blades and motor for visible damage such as cracks, bent blades, or signs of wear and tear. To replace the fan, detach the front grille and remove the control box assembly and air guide assembly from the unit. Loosen the screw on the cross flow fan and the screws securing the indoor motor and earth wire. Remove the supports on both sides of the fan and then pull out the fan from the air guide. This replacement part is sourced directly from the original equipment manufacturer and is sold individually.

Unusual noise from an indoor blower can be caused by a worn blower wheel bearing. This replacement bearing provides a smooth support point that allows the wheel to rotate while moving air across the room. Inspect the wheel for cracks, dirt, rubbing marks, or looseness, since these problems can produce similar sounds. Turn off the unit at ...Read morethe breaker and verify that power is disconnected before opening the cabinet. Keep track of screws, clips, and wheel position during removal. Install the bearing in the correct direction, avoid forcing it into place, and spin the wheel by hand to check for rubbing before reassembly.

This is a genuine LG air filter sourced directly from the manufacturer. It is designed for your LG air conditioning unit, and prevents dirt, debris, and other airborne particles from entering your home. Its exterior is made of plastic, and it is approximately 13 by 12 inches.

This control panel overlay serves as the primary user interface for compatible LG air conditioner models, providing access to essential functions such as power control, temperature adjustment, and fan speed selection. Designed to cover and protect the internal control board, it features clearly marked, touch-sensitive buttons for intuitiv...Read moree operation. Manufactured to meet strict compatibility and quality standards, this replacement part restores both the appearance and functionality of the unit when the original overlay becomes worn or damaged. Installation typically involves removing the old overlay and aligning the new one over the control panel to ensure proper fit and responsiveness.

This an authentic OEM display board for your room air conditioner. It is designed to display the selections the user has made for the air conditioner such as operating mode and fan speed. Be sure to unplug your air conditioner before you begin this repair.

This has been redesigned and will need a new mounting bracket - search by model#.