AX4000FA Shimano Spinning Reels - Overview

It is an authentic OEM part which is made for use with Shimano fishing reels. This is the special screw which secures the side plate. It is an identical replacement for a missing or a damaged part that was installed on a new unit. This high-quality screw is made of durable metal and is sold as an individual item. Refer to the appropriate ...Read morediagrams for your model to ensure the proper replacement procedure. A screwdriver will be needed to remove and reattach this screw.

This authentic part is supplied by the original equipment manufacturer for use with Shimano fishing reels. The spring applies tension on the connected parts. Unfortunately, over time it will wear out and it may begin to stretch eventually requiring a replacement. This high-quality spring is made of durable metal and is sold as an individu...Read moreal item. Check the diagrams for your model to ensure the proper repair procedure. A screwdriver might be needed to replace this anti-reverse cam spring.

This replacement ball bearing is an authentic Shimano component which is designed for use with fishing reels. Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Symptoms of failing bearing may ...Read moreinclude squealing, screeching, and an entirely new type of grinding noise. This high-quality component is made of durable metal and is sold as an individual part. A screwdriver will be needed to perform this repair. Make sure to refer to the appropriate diagram for your model to ensure the proper replacement procedure.

This authentic manufacturer-supplied washer is specially made for use with Shimano fishing reels. It is a special hardware that helps to provide a tight seal between connected components. This is an identical replacement for a missing or a worn washer that was installed on a new unit. One durable metal part is included. Refer to the appro...Read morepriate diagrams for your model to ensure the proper repair procedure. A screwdriver might be needed to replace this hardware.

This authentic OEM washer in your spinning reel is positioned next to the drive gear, which is responsible for turning the spool and controlling the line retrieval. It can be found within the body and side cover of the reel. The washer acts as a cushion, reducing friction and ensuring smooth operation of the reel. Over time, the washer ca...Read moren become worn, damaged, or corroded. Signs that it needs to be replaced include increased noise, decreased smoothness in reel operation, or if the drive gear shows excessive wobbling or play. To remove the existing washer, you need pliers and a screwdriver. Follow the steps in your user manual to remove the spool, rotor, anti-reverse assembly, pinion bearing, and drive gear. Once removed, replace the drive gear and bearing with the new washer, then reassemble the reel in the reverse order.

This is an original Shimano replacement part. The side cover screw is designed by the manufacturer for use in spinning reels. This part is made of metal, and is generally used in securing the body assembly. Please be aware that there are different screws used in the reel. Refer to the parts diagram to be sure of ordering the correct p...Read moreart. You will require a screwdriver when replacing this item. This product is sold individually.