AX2500RB Shimano Spinning Reels - Overview

The bail spring goes next to the bail spring guide A support. This item is made out of metal and is sold individually. This authentic item is supplied directly from the original equipment manufacturer for use with Shimano reels. During replacement, it may require a screwdriver to help install this part correctly. Over time this part may bend or break and will need to be replaced.

This line roller spacer is a genuine item that is supplied by the original equipment manufacturer for use with Shimano spinning reels. It fits between the line roller and the line roller washer and helps to reel in the line. The spacer is a very small part and will need to be replaced if it gets lost and a screwdriver may be needed during...Read more the replacement of this part. This spacer is made of plastic and is sold individually.

This is an authentic Shimano replacement part that has been sourced from the original manufacturer to be used with spinning reels. The metal screw is used to fasten the top portion of the rear cover to the body of the reel. This item is available as an individual replacement part.

It is an authentic OEM sourced item which is specially produced for use with Shimano reels. The crosshead screw connects to the right side plate and is made of metal. This is a very small part that will need to be replaced if it gets lost or stripped. A Phillips screwdriver is needed to replace the screw. This is available as an individual replacement part even though many might be needed.

This is an authentic replacement part manufactured for use with spinning reels. The screw is commonly used to secure the bail arm to the rotor assembly. This screw is sold as an individual replacement part, please see model diagram and part list for associative parts.

This item is a genuine Shimano replacement part that has been sourced from the original manufacturer to be used with spinning reels. The metal bail assembly is used to support the line roller and to allow the line to be cast and secure the line when the cast is complete. This item includes the bail arm, but please note the line roller assembly is separate.

This is a Genuine Manufacturer Sourced replacement part used on Shimano Spinning Reels. This part is made out of Metal and it is Sold Individually. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces...Read more friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. To replace this Bearing you would need a Screwdriver. First you would need to disconnect the Reel Handle. Then remove the Side Cover by loosening the Screws that hold it. You should be able to remove the old Bearing. Install new Bearing and Reassemble the Reel

This replacement ball bearing is an authentic Shimano component which is designed for use with fishing reels. Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Symptoms of failing bearing may ...Read moreinclude squealing, screeching, and an entirely new type of grinding noise. This high-quality component is made of durable metal and is sold as an individual part. A screwdriver will be needed to perform this repair. Make sure to refer to the appropriate diagram for your model to ensure the proper replacement procedure.