AX-4000FB Shimano Spinning Reels - Overview

The bail spring goes next to the bail spring guide A support. This item is made out of metal and is sold individually. This authentic item is supplied directly from the original equipment manufacturer for use with Shimano reels. During replacement, it may require a screwdriver to help install this part correctly. Over time this part may bend or break and will need to be replaced.

This is an authentic Shimano replacement part that has been sourced from the original manufacturer to be used with spinning reels. The metal screw is used to fasten the top portion of the rear cover to the body of the reel. This item is available as an individual replacement part.

This is an authentic Shimano replacement part manufactured for use with spinning reels. The bail arm is used to connect the bail wire to the rotor assembly and to provide a pivot point for the bail. This bail arm is available as an individual replacement part, please see model diagram for associative parts.

This replacement ball bearing is an authentic Shimano component which is designed for use with fishing reels. Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Symptoms of failing bearing may ...Read moreinclude squealing, screeching, and an entirely new type of grinding noise. This high-quality component is made of durable metal and is sold as an individual part. A screwdriver will be needed to perform this repair. Make sure to refer to the appropriate diagram for your model to ensure the proper replacement procedure.

This authentic manufacturer-supplied washer is specially made for use with Shimano fishing reels. It is a special hardware that helps to provide a tight seal between connected components. This is an identical replacement for a missing or a worn washer that was installed on a new unit. One durable metal part is included. Refer to the appro...Read morepriate diagrams for your model to ensure the proper repair procedure. A screwdriver might be needed to replace this hardware.

This authentic OEM washer in your spinning reel is positioned next to the drive gear, which is responsible for turning the spool and controlling the line retrieval. It can be found within the body and side cover of the reel. The washer acts as a cushion, reducing friction and ensuring smooth operation of the reel. Over time, the washer ca...Read moren become worn, damaged, or corroded. Signs that it needs to be replaced include increased noise, decreased smoothness in reel operation, or if the drive gear shows excessive wobbling or play. To remove the existing washer, you need pliers and a screwdriver. Follow the steps in your user manual to remove the spool, rotor, anti-reverse assembly, pinion bearing, and drive gear. Once removed, replace the drive gear and bearing with the new washer, then reassemble the reel in the reverse order.

This is a genuine Shimano replacement part that has been sourced from the original manufacturer to be used with spinning reels. The handle screw lock fits into the body of the reel and is used to secure the handle screw. This item is sold as an individual replacement part.

This is an authentic Shimano replacement part manufactured for use with spinning reels. The special screw is compatible with several models of reels and is commonly use to secure the rear protector to the body of the reel. This screw is available as an individual replacement part, please see model diagram for associative parts.