This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
This thermal fuse is a manufacturer-approved replacement part for your oven. It is common for the oven to lose power after completing a self-cleaning cycle, and the thermal fuse is often at fault. Replacing the blown fuse is a fairly easy repair, and involved removing the top of the oven to swap out the fuse. Make sure to turn off the power source to the oven before beginning this repair.
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
This is a 25W 125-130V incandescent light bulb designed for use and compatible within various makes and models of microwaves, ranges, oven/microwave combos, and wall ovens. If you notice the lightbulb flickering, getting progressively dimmer, emitting a slight humming noise, taking excessively long to brighten, or if it is simply dead ? i...Read moret needs replacing as soon as possible. This light bulb normally comes with a bulb cover lens, which may also need to be replaced depending on why your lightbulb needs replacing. Make sure to follow all safety precautions during this replacement process and seek professional assistance if necessary. To replace this bulb, disconnect your appliance from its power source. Locate the bulb within your appliance and use a screwdriver to disconnect and remove the panel housing the light bulb. Be careful not to touch any capacitors within the appliance, or you could electrocute yourself. Unscrew the lightbulb socket housing and then unscrew and replace the bulb within it. Then you can reassemble the rest of the microwave.
This oven light lens cover is a durable, heat-resistant component designed to shield the interior light bulb from heat, debris, and everyday wear while still allowing bright, clear illumination inside the appliance. Made from sturdy plastic, it features a simple, straightforward design that makes installation quick and easy when replacing...Read more a cracked or damaged cover. The lens is typically clear or slightly frosted to diffuse light evenly throughout the oven cavity. Because this part is used across a wide range of appliances, it’s important to confirm that it matches your specific model to ensure a proper fit.
This genuine broil element provides the intense radiant heat required for broiling and upper-oven cooking functions. Mounted at the top of the oven cavity, it helps deliver consistent high-temperature performance for broiling meats, browning foods, and achieving even cooking results. Replacing a damaged or failed broil element can help re...Read moresolve issues such as the oven not heating properly, uneven broiling, visible element damage, sparking, or incomplete cooking performance. Installation typically involves disconnecting power to the appliance, removing the mounting screws securing the existing element, carefully pulling the element forward to access the wire connections, transferring the wires to the replacement element, securing the new element in place, and restoring power to test operation. Designed for reliable, long-lasting performance, this genuine replacement part helps restore proper broiling functionality and overall oven performance.
This high-limit thermostat is a safety-critical component designed to prevent overheating in ranges and wall ovens. It monitors internal temperatures and cuts power to the heating elements if the oven exceeds a preset threshold, typically around 335°F (170°C). Constructed from heat-resistant materials for long-term durability, it helps pr...Read moreotect internal components and reduce the risk of fire or damage caused by control system failures, ventilation blockages, or fan malfunctions. A faulty thermostat may result in no heat, uneven cooking, or failure to start. Replacing this part restores safe and reliable oven operation. Installation should be performed with the appliance disconnected from power.
This bottom oven vent assembly is designed to direct hot air away from the oven cavity, helping regulate airflow and maintain a stable internal temperature during cooking. Made from stainless steel, it also provides a clean, finished appearance to the lower front of the oven. Manufactured to original equipment standards, it fits select wa...Read morell oven models and serves as a direct replacement for damaged or missing vents. Installation involves shutting off power at the circuit breaker, allowing the oven to cool, removing the lower door, unscrewing the old vent, securing the new one, and reinstalling the door. Proper installation ensures safe and efficient oven performance.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
After running oven in BROIL for lengthy period, entire oven shut off, thermal fuse blown
25 of 29 peoplefound this instruction helpful.
JAMES P from UPATOI, GA
Very Easy
30 - 60 mins
Pliers, Screw drivers
USE 2 PEOPLE FOR SAFETY! SWITCH OFF OVEN POWER BREAKER!! Remove screws attaching oven to wall opening, slide out entire oven just far enough to get to 2 screws on either side of controls, remove those screws (may need stubby screwdriver), lift control front, opens forward, have 2nd person hold control panel cover while removing centered
... Read more thermal fuse (plugs on both ends, may need needle-nose pliers to grip plug on fuse.) Remove old fuse, plug in new one. Close control panel, replace side screws, TEST POWER BEFORE pushing oven back into wall, replace wall-holding screws. Less than 30 minutes. EXTRA PERSON MAKES EASY!
Read less
Was this helpful?
Thank you for voting!
Thermal fuse blew while oven was in use and we had a power outage.
15 of 19 peoplefound this instruction helpful.
Jeffrey from TOWNSEND, TN
Really Easy
15 - 30 mins
Pliers, Screw drivers
Thanks to PartSelect they suggested to try a new thermal fuse first. They also gave a brief description of how to install it. There advice was right on. Replaced the fuse in about 20 minutes from throwing the breaker to turning it back on.
Instructions: Turn off breaker. Remove oven door. Remove screws holding it to cabin
... Read moreet. Remove racks. Slide oven out about four inches. Remove four screws holding control panel. Remove thermal fuse. Replace thermal fuse and put it back together.
Thank you PartSelect. Thermal fuse cost me about $28.00 with shipping. This repair would have cost a couple of hundred if I had to call a repair technician.
Read less
Was this helpful?
Thank you for voting!
Scratches in Surface
83 of 227 peoplefound this instruction helpful.
Michelle from Richardson, TX
Really Easy
Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.