EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

AW600A0T Kelvinator Washer - Overview

Diagrams for AW600A0T

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water Inlet Valve – Part Number: 134190200
$117.66
In Stock
Water Inlet Valve
★★★★★
★★★★★
(12)
Part #134190200
The water inlet valve has two ports for water to enter and controls the flow of water into a washing machine. Hot, cold, and warm water can easily enter the washer this way. If the water inlet valve is in any way damaged or defective, it may be slow to fill or even leak. Before beginning this replacement, make sure to unplug the washer from the power range or shut off the house circuit breaker. Remember to wear gloves for safety. Refer to the installation instructions and the diagram provided by the manufacturer for best results and accuracy.
SCREW – Part Number: 131168200
$26.35
In Stock
SCREW
Part #131168200
Sold individually.
Upper Spin Bearing Washer – Part Number: 5308002401
$25.14
In Stock
Upper Spin Bearing Washer
★★★★★
★★★★★
(1)
Part #5308002401
The upper spin bearing for a washer can solve many issues such as loud and odd noises, or leaking water. Replacing the spin bearing could solve these issues. The tools needed for this replacement are screwdrivers, a socket set, and a putty knife. To repair, first lift the top of the washer and remove the screws at the bottom of the front panel to pull away. Next, pull off the dispenser cover, cup, and agitator. Detach switch tube from the tub cover and remove tub cover, then use the 1/2 inch socket to remove the trunnion bolts and pull out inner tub. For the rest of the installation instructions, refer to the diagram provided by the manufacturer. Remember to unplug the appliance from the power source as a safety precaution.
SPACER – Part Number: 5308015493
No Longer Available
SPACER
Part #5308015493
This spacer is used in washers or a washer and dryer combo unit. Spacers are used to create space between cotter pins, lock nuts, hitch pins or to fill the space between machinery parts in a washer. This part goes between the timer knob and the dial in a washer to function effectively and provide protection. The length of this part is 6.35 inches with a width of 5.25. The spacer has a height of 8.125 inches and the weight of 0.3 pounds. Refer to the manual provided by the manufacturer for further installation instructions and guidance. Remember to unplug your appliance from the power source.
SNUBBER RING – Part Number: WH1X2312
No Longer Available
SNUBBER RING
Part #WH1X2312
Single Tub Cover Clip – Part Number: 5303161199
No Longer Available
Single Tub Cover Clip
Part #5303161199
Transmission to Tub Seal Kit – Part Number: 5308950197
No Longer Available
Transmission to Tub Seal Kit
★★★★★
★★★★★
(1)
Part #5308950197
This is a transmission to tub seal kit, often referred to as a center tub seal kit, and it is used in washing machines to create a seal between the transmission and the tub. This seal works to prevent leaks from around the basket drive shaft, between the outer tub and the spin basket. We reccomend that you replace the tub seal kit if you are replacing the transmission. The kit includes the instructions you will require for installation. Before you begin the repair on your washer, make sure it is unplugged and the water supply is shut off.
Upper Lip Seal – Part Number: 5303161307
$36.29
Special Order
Upper Lip Seal
Part #5303161307
This basket drive tube seal or upper lip seal is used for a top washer and is located on top of the transmission, below the agitator drive block. The tube seal functions as a protective tool to prevent water from leaking into the drive tube. The measurements for this seal are: 4 inches in length, 1 inch in height, and 0.01 lbs in weight. Remember to unplug your washer from the power source before beginning this installation, as a safety precaution. For installation instructions and accurate guidance, refer to the manual provided by the manufacturer.
Screw – Part Number: 131243800
$19.69
Special Order
Screw
Part #131243800
Sold individually.
Spring-Type Washer – Part Number: 5303161306
$25.18
Special Order
Spring-Type Washer
Part #5303161306
Inlet Hose - 5 FT – Part Number: 5303912532
$72.38
Special Order
Inlet Hose - 5 FT
Part #5303912532
SCREW – Part Number: 3161259
No Longer Available
SCREW
Part #3161259

Common Symptoms of the AW600A0T

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer Continued To Fill To Point Of Overflow
86 of 97 people found this instruction helpful.
  • alvaro from east hampton, NY
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First I removed the top panel held by four screws at rear of panel, pulling the panel foward and up. Then disconnected the power and water connections. Then I removed the two screws holding the flow valve to the washer rear panel,pulled the valve foward ,removed the two electric connectors, pinched the water clamp with pliers and remo ved the water connection to the valve. Then replaced with the new valve followed the above steps in reverse order, finishing up by re placing the water connections and power. Then checked fo proper replacenent and leaks before replacing top panel.
Was this helpful?
Thank you for voting!
Leaking washing machine.
24 of 37 people found this instruction helpful.
  • Ron from Williamsburg, MI
  • Easy
  • More than 2 hours
  • Screw drivers, Socket set
Removing the piece above the tub gasket was very difficult. A lot of hammer and chisel work.
15 year old machine. A lot of calcium build up around the shaft. I used a screw driver as a chisel and a hammer. Carefully removed the metal around the shaft to get to the tub seal.
Once I got to the tub seal it was easy. Remove t he old rubber stops. There were a few pieces. Then sealed it back up with the oil that came with the PartSelect Kit and put it back together. Works great now. No more LEAKS! Yippy.
Was this helpful?
Thank you for voting!
No Cold Water
17 of 19 people found this instruction helpful.
  • Mark from Pittsburgh, PA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Checked problem on-line and discovered it was the water inlet valve. Matched the part on part select. Com. Finding the part was very easy. Part select had a grid behind the picture to help determine the size and pictures from all sides. Removing the old part, matching it, and replacement took a total of 30 minutes. I now have cl ean clothes.
Was this helpful?
Thank you for voting!