AV600-660044H Tecumseh Engine - Overview

This is an authentic OEM sourced replacement part, it is specially made for use with lawn and garden equipment. It is a standard hardware which has multiple applications depending on your model, please refer to appropriate diagrams for correct location and use of this item. Please note this high-quality hex head screw is sold individually.

This is replacement oil for your 2-cycle engine. Oil is important for your 2-cycle engine, as it helps to lubricate the engine parts during operation. This container of oil is 236mL or 8 fluid ounces. It is sold individually.

This spark plug cover is supplied directly from the original equipment manufacturer. The rubber and metal component is often used in snowthrower engines, and is sold individually. The spark plug cover is fitted over the spark plug wire connection, providing protection. A screwdriver and pliers may be required for the removal and replacement.

This recoil starter assembly turns the engine when the starter rope is pulled. It contains the housing, pulley, rope, spring, and starter parts needed to engage the engine. Replace it if the rope breaks, will not pull, will not rewind, or slips without turning the engine. Use the complete engine model and specification numbers to guarante...Read moree the proper fit. Check the product listing because the pull handle and mounting screws are not included. Let the engine cool and disconnect the spark plug wire before repair.

This is an OEM part sourced directly from the manufacturer. The ring set is commonly found in snow throwers from Toro and engines from Husqvarna. This is a set of two metal rings which are inserted into grooves on the outer surface of the piston to help seal it inside the cylinder. You may require pliers and a screwdriver when replacing this item.

This is an original replacement part sourced directly from the manufacturer. The cylinder head gasket is commonly found in Toro snowthrowers. This part is placed between the cylinder and the cylinder head to prevent inadvertent leakage. You may require a torx screwdriver when replacing this item. The cylinder head gasket is sold as an individual replacement part.