AV520-670118 Tecumseh Engine - Overview

This is an authentic OEM sourced replacement part, it is specially made for use with lawn and garden equipment. It is a standard hardware which has multiple applications depending on your model, please refer to appropriate diagrams for correct location and use of this item. Please note this high-quality hex head screw is sold individually.

The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers and a screwdriver. If broken due to wear/fatigue/damage, there may be a fuel leak and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

This is replacement oil for your 2-cycle engine. Oil is important for your 2-cycle engine, as it helps to lubricate the engine parts during operation. This container of oil is 236mL or 8 fluid ounces. It is sold individually.

This primer line hose, which measures 18-3/4 inches long is a crucial component in your outdoor power equipment. It delivers fuel from the primer bulb to the carburetor, providing the initial fuel boost to start the engine. If you notice fuel leaks, cracks, or visible wear on the hose, it means that it is broken. Additionally, a spongy pr...Read moreimer bulb or the failure to deliver fuel to the carburetor when pressed are signs of a malfunctioning primer line hose. When this happens, your machine will be difficult or impossible to start. To remove the hose from your machine, disconnect it from both the carburetor and the primer bulb with pliers or a screwdriver. Please note that this replacement part is sold individually as an authentic OEM component.

The fuel line is a rubber hose that is responsible for allowing the fuel tank to supply the carburetor and various engine components with fuel. This fuel line is designed to be compatible with various types of lawn equipment and is an authentic OEM part. Because it interacts with gas and oil frequently, it will eventually become brittle a...Read morend crack and need to be replaced. To replace it, you will need to drain the fuel from your equipment, remove the clamps securing the ends of the line, and then swap out the old line for the new, before installing the clamps back. Make sure to check the fuel line frequently for cracks and damage to prevent any leaks from harming your equipment and to maintain its health and performance.

This spark plug cover is supplied directly from the original equipment manufacturer. The rubber and metal component is often used in snowthrower engines, and is sold individually. The spark plug cover is fitted over the spark plug wire connection, providing protection. A screwdriver and pliers may be required for the removal and replacement.