ATW4675EW0 Admiral Washer - Overview

Diagrams for ATW4675EW0

See every part. Know exactly what you need.

Parts for the ATW4675EW0

$38.96

Washer Drive Pulley

★★★★★

(23)

Part #W10721967

This splutch cam kit is a genuine replacement assembly designed for select Whirlpool, Maytag, and affiliated brand washing machines. It plays a critical role in the wash and spin cycles by engaging the drive motor to rotate the washer basket. The kit includes the clutch assembly, cam ring, spring, basket drive gear, pulley, and mounting n...Read more

Read less

$29.47

Washer Drive Belt

★★★★★

(21)

Part #WPW10006384

This genuine OEM drive belt is designed to transfer power from the motor to the drum in select Whirlpool, Maytag, Kenmore, and other compatible washing machines. Operating at 115 volts and 60 Hz, the belt enables the drum to spin and agitate during wash and spin cycles, ensuring effective cleaning and rinsing. Manufactured to Whirlpool’s ...Read more

Read less

$102.77

Washing Machine Door Lock Assembly

★★★★★

(30)

Part #W11307244

This is lid lock designed for use within various washing machines. This lid lock, also known as a latch assembly, is used to secure the lid of your washing machine during the washing cycle. If your washing machine is experiencing issues starting or if the lid is not securing, this lid lock assembly likely needs to be replaced. This lid lo...Read more

Read less

$76.17

Suspension Rod Kit

★★★★★

(48)

Part #W10780045

This suspension rod kit includes four rods designed to stabilize the wash tub in compatible top-load washing machines. By minimizing vibrations and excessive movement during wash and spin cycles, these rods help maintain balance and improve overall performance—especially when handling off-balance loads. Replacing worn or damaged suspensio...Read more

Read less

$12.85

Washer Washer

★★★★★

(1)

Part #WP3949550

This part goes on the agitator retaining bolt.

$51.61

Shift Actuator - 6 Pin

★★★★★

(18)

Part #W10913953

This 6-pin shift actuator is an authentic OEM part supplied directly by the manufacturer for use in washing machines. The shift actuator is responsible for controlling the movement of the washer transmission during the different phases of the wash cycle. This allows the washer to switch between agitating and spinning modes. Signs of a fau...Read more

Read less

Touch-Up Paint - White

★★★★★

(7)

Part #72017

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more

Read less

$9.62

Washer D-Shaped Knob Insert

★★★★★

(2)

Part #WP8536939

This insert is sold individually. Knob not included. Knob is sold separately.

$9.62

Hose Clamp

★★★★★

(2)

Part #WP285655

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read more

Read less

$7.47

Lid Hinge Mounting Screw

★★★★★

(2)

Part #WPW10119828

Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.

$21.45

STRIKE

★★★★★

(6)

Part #W10837741

This is a lid strike for various models of top-load washing machines. Lid strikes are designed to engage with the lid switch and communicate to the control board that the washer can start. If your washing machine is having issues starting, or if the lid strike for your washer is visibly damaged it will need to be replaced. Replacing this ...Read more

Read less

$61.55

Water Inlet Valve

★★★★★

(21)

Part #W11038689

This is an inlet valve for various washing machines. Inlet valves are responsible for opening and closing as needed, to allow water to enter the washer during the washing cycle. This inlet valve features a hot and cold-water valve, as well as the necessary wire harness to easily plug it in. Since inlet valves are an electrically controlle...Read more

Read less

Questions And Answers for ATW4675EW0

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Felipe - For model number ATW4675EW0

August 24, 2023

cold water does not come out of my washing machine:(

Hi Felipe, thank you for the great question. We have concluded that the issue is with the water inlet valve, part number PS11773194. It controls the cold and hot water flow into the washer. We hope this solves your problem!

$61.55

Water Inlet Valve

Was this helpful?

Cynthia - For model number ATW4675EW0

March 10, 2024

I recently changed the shift actuator and the split h it ran fine for the first load on the second load it made a very loud grinding noise now it will not spin not sure if it’s even agitating

Hello Cynthia, thank you for reaching out. Based on our understanding of the issue, we would suggest replacing the gearcase, part number PS16220913, to solve the problem. It drives the agitator and spins the basket in the washer. We hope that helps!

$214.98

Gear Case

Was this helpful?

Jared - For model number ATW4675EW0

October 5, 2025

My washer shakes hard and bangs during the spin cycle.

Hello Jared, thank you for getting in touch. A washing machine is banging or shaking hard during the spin cycle because of worn suspension rods or an unbalanced load. Check the suspension rods, part number PS11703288, which connect the tub to the washer's chassis, for cracks or bending. If the rods are worn out or bent, the washer will shake. We hope this helps.

$76.17

Suspension Rod Kit

Was this helpful?

Common Symptoms of the ATW4675EW0

How this model fails, and the parts that fix it.