EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

ARTC71 Amana Range - Overview

Models starting with ARTC71

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake Element – Part Number: WP77001094
$30.53
In Stock
Bake Element
★★★★★
★★★★★
(44)
Part #WP77001094
Please note: This is a substitute from the original part. It may physically look different, but will still function the same. This bake element is found on the bottom of the oven.
Range Terminal Block – Part Number: WPW10245259
$27.36
In Stock
Range Terminal Block
★★★★★
★★★★★
(20)
Part #WPW10245259
This part is for oven ranges, it connects individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness. Some symptoms replacing the terminal block could be a solution for are little to no heat when baking, element will not heat and/or it will not start. This part will prevent loosening and will reduce damage caused by corrosion (by two different metals). Refer to the instructional diagram for further replacement guidance and exact placement. You must unplug the appliance before installing this part and wear gloves to protect your hands.
2 Piece Broiler Pan – Part Number: 4396923
$49.50
In Stock
2 Piece Broiler Pan
★★★★★
★★★★★
(6)
Part #4396923
This broiler pan and roasting rack set is designed to help reduce mess while cooking by allowing grease to drain away from food. Its durable porcelain-coated construction stands up to high temperatures and makes cleanup simple. With approximate dimensions of 16 3/4 inches long, 12 3/4 inches wide, and 1 3/4 inches high, it offers a convenient size for everyday broiling and roasting.
Range Broil Element – Part Number: WPY0063532
$74.98
Special Order
Range Broil Element
★★★★★
★★★★★
(6)
Part #WPY0063532
This broil element is found on the roof of the oven and allows for an even heat when cooking food. The element may have shorted out and not be heating the oven, which might indicate it will need to be replaced. Before beginning the repair make sure your oven has been unplugged. Open the oven door and pull the old racks out. You will need to remove the screws holding the old broiler in place at the top of the stove. This is an OEM part that comes right from the manufacturer.
Range Temperature Sensor – Part Number: WPY0314907
$109.41
In Stock
Range Temperature Sensor
★★★★★
★★★★★
(1)
Part #WPY0314907
The temperature sensor is a part for the oven, on your range. This temperature sensor has a body length of just over 3 inches. The purpose of this part is to measure the temperature within the oven and report it back to the control board where it can be displayed. To make this repair you will need a number two Phillips screwdriver or a number two square-head screwdriver. To replace this part, you will need access to the back of the range. This means you will need to pull the range away from the wall, disconnect the power, and remove the back panel.
Range Frame Screw – Part Number: WP7101P126-60
$7.47
Special Order
Range Frame Screw
★★★★★
★★★★★
(1)
Part #WP7101P126-60
Sold Individually.
Range Anti-Tip Bracket – Part Number: WP3801F656-51
$8.55
In Stock
Range Anti-Tip Bracket
★★★★★
★★★★★
(1)
Part #WP3801F656-51
Sold individually.
Stand Mixer Screw – Part Number: WP4159193
$8.55
In Stock
Stand Mixer Screw
★★★★★
★★★★★
(1)
Part #WP4159193
This screw is sold individually.
Radiant Surface Burner Element 1500W – Part Number: W10823699
$105.35
In Stock
Radiant Surface Burner Element 1500W
★★★★★
★★★★★
(3)
Part #W10823699
This surface element is made for under glass set-ups and supplies the heat to a cooking area on top of the range. It has an outside diameter of approximately 7 inches (1500 watts), and is a genuine OEM part sourced directly from the manufacturer. Before you replace your faulty element, make sure the element is cool, and the power is disconnected from your range.
Hinge Kit - Right Side – Part Number: R0706011
No Longer Available
Hinge Kit - Right Side
Part #R0706011
The hinge kit, or oven door hinge, is used in ranges and wall ovens. The hinge attaches to the right side of the door and controls how fast the door opens. At a specific angle, it allows the door to remain open. If you are having trouble opening and closing your door, or it does not close at all, replacing the hinge could solve your problem. The hinge is made from metal and the kit comes with the hardware needed for this installation. You will need a screwdriver to perform this repair. *Please note: This part is only for the right side of your appliance. The left side is sold separately.
Hinge Kit - Left Side – Part Number: R0706010
No Longer Available
Hinge Kit - Left Side
Part #R0706010
Surface Infinite Switch – Part Number: WP74011243
$74.08
In Stock

Common Symptoms of models starting with ARTC71

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The Baking element in the bottom of the stove apparently shorted out and partially melted
59 of 61 people found this instruction helpful.
  • Timothy from Salem, OR
  • Easy
  • 15 - 30 mins
  • Pliers
First I turned off the circuit breaker on the house electricity panel. I removed the two screws that held the element in place in the oven. There were two wires connected to the element by spade plugs that were free floating in a fiberglass pad. I reconnected the spade plugs and put the element back in place and put back in the two sc rews. This procedure had I known what I was doing could have been done with the stove in place and would take no more than 5 to 10 minutes. Having no experience at this, I had pulled the stove out into the room and also removed the back cover which turned out to be unnecessary. I put everything back in place and held my breath and turned on the circuit breaker. Voila! It worked!
Was this helpful?
Thank you for voting!
Getting F 1 and 2 error codes and the oven turned itself off.
76 of 144 people found this instruction helpful.
  • Suzanne from Acton, MA
  • A Bit Difficult
  • Less than 15 mins
  • Screw drivers
Really easy but in this model there are 2 versions of the sensor, male and female. The website didn't have any place to see that. So the first sensor that came was male but we needed the other. After calling they sent me a return form and sent the new part (which was actually much cheaper) overnight and it went in very quickly. Would che ck this out again when anything went wrong. they are great folks to work with.
Was this helpful?
Thank you for voting!
Burned terminal block and filter board
95 of 207 people found this instruction helpful.
  • Joseph from Decatur, GA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set, Wrench set
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem.
Was this helpful?
Thank you for voting!