This is a float manufactured to fit into your dehumidifier. When the dehumidifier is in use and water is being absorbed from the air, the float detects the water level in your dehumidifier water bucket. When the appliance detects that the water bucket has reached its maximum level, it shifts the float switch to stop the appliance from deh...Read moreumidifying so the bucket will not overfill. If your bucket has been underfilling or overfilling, you may need to replace this switch. This float is white in color and made entirely of plastic. This is a genuine replacement part sourced directly from the manufacturer.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Norm - For model number APEL70LTL1
December 19, 2022
Dehumidifier runs a little bit then shuts off. It does not collect any moisture. How do I check the filter and float or any other potential problem?
Hello Norm, thank you for contacting us. According to our research, the issue is most probably related to a faulty float, part number PS3512331. For a detailed guide regarding dehumidifier repair, please read our article on this topic at the attached link. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Unit operates normally, but won't pump out water. Discharge line is attached and not blocked or plugged, and water bucket filter is clean. Shows "E0" code. Has the pump gone bad? Thoughts please. Thanks.
Hi Tom, thank you for the question. When water is not pumped out while the unit is running under the pump mode, E0 and the pump light will flash on the display. The issue is probably with the drain pump. The issue is probably with the drain pump. The drain pump does not come individually in your model. Therefore, you may need to replace the water bucket assembly, part number PS11763666. We hope this helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
had to replace original water float as the connector broke off
6 of 16 peoplefound this instruction helpful.
Mitsue from NEW ORLEANS, LA
Very Easy
Less than 15 mins
my model is so old it is no longer part of the GE inventory but looking at the photos on line - which are very good and detailed - and chatting with on line help decided to go ahead and order and it fit perfectly
Was this helpful?
Thank you for voting!
Support prong broke on float
1 of 4 peoplefound this instruction helpful.
Paula from HILLSBORO, OH
Very Easy
Less than 15 mins
1st of all, glued the broken prong that secured the float. Worked temporarily before breaking again. Started to trash the dehumidifier then looked online using the Model number. Parts select appeared thru the search and to my surprise, the part was available for under $20.00.
Ordered part and replaced it with ease. Works gr
... Read moreeat!
My Orders
