AO27DEW (P1113404S) Amana Range - Overview

Diagrams for AO27DEW

See every part. Know exactly what you need.

Parts for the AO27DEW

$75.65

Range Fully Open Bake Element (151/4 Long X 15.5 Wide)

★★★★★

(4)

Part #WP77001092

If you notice that your oven is not heating properly, you may need to replace your bake element. This bake element is a fully open, fixed style and is used for electric ranges and ovens. Carrying 240 volts and 2800 watts, it is 15-1/4 inches wide and 15-1/2 inches long. The depth of the terminals is 2-1/2 inches, making the total element ...Read more

Read less

DISCONTINUED

Part #Y0308168

GASKET- DO

Part #31715903

DISCONTINUED

Part #Y0302106

DISCONTINUED

Part #Y0042138

DISCONTINUED

Part #Y0052095

DOOR LATCH Assembly WO

Part #Y0041909

TERM Black EO&GO 1M-2.5

Part #Y0042191

SPRING,OVEN DOOR-PYRO

Part #Y0042740

Switch

Part #0042038

Selector switch pyr

Knob, Dial & Button

Part #R0703598

Kit,thermostat/sel.kn

Common Symptoms of the AO27DEW

How this model fails, and the parts that fix it.

Little to no heat when baking

Fixed by
these parts

Show All

Element will not heat

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Oven element burnt out and broke apart.

16 of 19 people found this instruction helpful.

Lana from Pineville, WV
Really Easy
Less than 15 mins
Screw drivers

After ordering the element, found out it was the wrong element, I needed an 18.5 inch x 15.5 instead of the 15 1/4 x 15 1/2"...I slowly bent the element in shape to fit my oven. It works beautiful.
But for you guys, order the right one. Don't forget to measure your old elements spread from connection to connection. Install the new el ... Read more

Read less

Was this helpful?

Element broken, oven would'nt heat

7 of 8 people found this instruction helpful.

frances from Coffee Springs, AL
Really Easy
Less than 15 mins
Screw drivers

First I removed the two screws that hold the element in place. Then I pulled the element out about 3 inches and disconnected the two wires. Reconnected the new wires, put the screws back in and the oven WORKED!!

Was this helpful?

Heating element burned out...forcing me to replace it.

4 of 5 people found this instruction helpful.

Stephen from Cedar Rapids, IA
Easy
Less than 15 mins
Screw drivers

Our oven is a wall mounted oven so I could not reach the plugin. Therefore I shut the power off at our breaker box. I then removed the screws that held the old heating element to the oven. Removed the element, slipped connecting wires off of the old element. Next I slipped the connector wires onto the new element and replaced the scre ... Read more

Read less

Was this helpful?