EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

AK2H35 Amana Cooktop - Overview

Models starting with AK2H35

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cooktop Cleaner – Part Number: W10355051
No Longer Available
Cooktop Cleaner
★★★★★
★★★★★
(7)
Part #W10355051
This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a large amount of product to do the job. This cleaner is perfectly safe to use on any glass, ceramic, stainless steel, chrome, or porcelain cooktop surface. The cleaner is creamy in texture and provides a protective coat of silicone on smooth surfaces. To apply, use a gentle scrub, sponge, or rag and gently press in a circular motion until the stains are removed.
Cooktop Cleaner – Part Number: TJ114
No Longer Available
Cooktop Cleaner
Part #TJ114
Cleans/Polishes all glass, ceramic, porcelain and fiberglass surfaces.
Control Knob – Part Number: WPD8598001
$53.20
In Stock
Control Knob
★★★★★
★★★★★
(5)
Part #WPD8598001
This black control knob is a little over two inches in diameter.
Electric Hole Cover – Part Number: WPY0307427
No Longer Available
Electric Hole Cover
Part #WPY0307427
This hole cover is almost two inches in diameter. It fits below the surface burner knob of some ranges, and has a center hole just big enough for the knob's shaft.
Range Installation Screw – Part Number: WP3400882
$7.47
In Stock
Range Installation Screw
★★★★★
★★★★★
(2)
Part #WP3400882
This screw is sold individually.
Control Knob – Part Number: WP307620W
No Longer Available
Control Knob
Part #WP307620W
This control knob is just over two inches in diameter. It is white and made of plastic. There is gray lettering on this knob to denote the different degrees of temperature.
Radiant Surface Burner Element 1500W – Part Number: W10823699
$105.35
In Stock
Radiant Surface Burner Element 1500W
★★★★★
★★★★★
(3)
Part #W10823699
This surface element is made for under glass set-ups and supplies the heat to a cooking area on top of the range. It has an outside diameter of approximately 7 inches (1500 watts), and is a genuine OEM part sourced directly from the manufacturer. Before you replace your faulty element, make sure the element is cool, and the power is disconnected from your range.
Control Hole Cover – Part Number: B5037602
No Longer Available
Control Hole Cover
Part #B5037602
This control hole cover sits under the control knob.
Dual Radiant Element with Limiter – Part Number: W10823726
$151.04
In Stock
Dual Radiant Element with Limiter
★★★★★
★★★★★
(2)
Part #W10823726
With the dual element you are able to adjust the size of the burner you want to use to match your pots/pans.
Refrigerator Screw – Part Number: WP488234
$8.55
Special Order
Refrigerator Screw
Part #WP488234
This screw is sold individually. Size: 8-32 x 1/4 inch.
Control Knob – Part Number: 307620B
No Longer Available
Control Knob
Part #307620B
Sold Individually. This knob accepts a double-flat shaft.
Dual Burner Element with Limiter – Part Number: W10823694
$174.48
In Stock
Dual Burner Element with Limiter
★★★★★
★★★★★
(1)
Part #W10823694
This dual radiant surface element restores proper heating on an electric cooktop and provides both an inner and outer heating ring so you can match the burner size to different pans. It is commonly replaced when a burner stops heating or heats unevenly, helping return consistent performance for everyday cooking tasks like boiling, simmering, and frying. Installation involves disconnecting power, lifting the cooktop or accessing the burner housing, transferring the wiring from the old element to the new one, and securing it in place.

Common Symptoms of models starting with AK2H35

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Outer Heater ring not working on dual burner.
24 of 28 people found this instruction helpful.
  • Mark from Richardson, TX
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Turned off power to unit.
Tilted up Glass top and removed two screws holding rear hinges to range. Then I unplugged wire harness from lower range and placed the Glass top facing down on counter top with towel for cushion. Removed 1 screw holding center of burner to support frame, two alignment screws on perimeter, and two screws hol ding support frame to glass top. This allowed me to slide out the old element with all wiring connections intact.
Placed the new assembly in same location under support frame, noting numbered positions of two alignment screws from old unit. This is necessary to properly align heater to surface glass. Replaced all screws connecting burner to frame. Then I removed each wire one-by-one from old unit, reconnecting to same location on new unit.

Replaced top in reverse order from removal. Powered on the circuit breaker and verified proper operation of dual unit with large/small selecttor switch. Total time to repair about 30 minutes.
Was this helpful?
Thank you for voting!
Letters worn off from knobs
14 of 17 people found this instruction helpful.
  • Joseph from Laurel, MD
  • Really Easy
  • 1- 2 hours
Our Amana stove top letters had worn off the knobs. We bought new knobs a few years ago and the same thing happened. This time we bought new knobs and coated the lettering with 5-minute epoxy to preserve the lettering.
Was this helpful?
Thank you for voting!
Replacement of burner control switch
11 of 13 people found this instruction helpful.
  • Farouk from Sudbury, MA
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers
1. Open the circuit breaker feeding the range. Turn all range control switches ON to establish that there is no power. Remove all knobs.
2. Get under the range and remove the 2 hex-head screws securing the flex conduit to the bottom panel. Then remove the 20 hex-head screws securing the panel to the range. Lower the panel and place a side, and then after checking for no voltage disconnect the red and black incoming wires by pulling on the spade connectors. Make sure you mark which wire went where.
3. From below apply pressure to the range frame to free the top surface gasket from collected food debris, then from above lift our the range and place upside down on a towel. Support the range with wooden blocks so that the unit is not resting on the knob shafts.
4. The control switches are all mounted on a common bracket with two screws for each switch. The first task is to remove two screws on each side holding the bracket to the frame, and then two wire harnesses on each side. Then gently move the bracket and rotate it sidewards so you have access to the screws holding down the switches.
5. Remove the defective switch leaving all the wires still connected.
6. Install the new switch and transfer the wires from the defective switch.
7. You're done, now restore everything in reverse, just make sure all wires move freely and not pinched.
Was this helpful?
Thank you for voting!