AHM40LKG1 General Electric Dehumidifier - Overview
Sections of the AHM40LKG1
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Manuals & Care Guides for AHM40LKG1
Click to downloadQuestions And Answers for AHM40LKG1
Ask our experts a question about this model and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug
November 29, 2019
What does p1 or p2 means on the display
For model number AHM40LKG1
Good Day Doug. Thank you for your question in regards to your unit (Model Number AHM40LKG1). Based on our research we have found the following information in regards to you unit. P1 is auto defrost mode. It's normal for the coils in dehumidifiers to frost. When this happens, the unit will go into auto defrost mode. Once the unit has finished defrosting it will go back to the programmed settings. P2 – Bucket is full. Empty the water bucket and reinstall it. Hope this helps. Best Regards.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.