AG6 - Overview

This blade is sourced directly from the manufacturer for use in Craftsman and Husqvarna lawn mowers. The blade is the part of the mower that is responsible for cutting and mulching the grass. It is 22" long, made of black metal, is not part of a kit or assembly, and is sold individually. If you hit a hard object, you may bend the blade,...Read more causing a vibration. You may also have problems with the grass being cut as the blade dulls over time. If the blade is bent, damaged, or worn, it needs to be replaced. You will need a socket set to complete this repair. Customers rate this repair as Easy.

The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will require a wrench. If broken, damaged, or worn due to fatigue, you will see visable damage and you may have debris getting caught in the axl...Read moree. If broken, replace it. Refer to your make, model and diagram to make sure you're choosing the right part. This part comes individually sold.

This genuine manufacturer sourced replacement part is designed for use with lawn mowers.It attached to the mower deck to protect your feet and legs from grass clippings and debris. It is made out of plastic and it is sold individually. Please note the brackets and hardware are sold separately.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

Upgrade your lawn mower with the Husqvarna Wheel & Tire Assembly. This front drive wheel, specially designed for maximum maneuverability and stability, is an essential for both residential and professional lawn care. Measuring at a diameter of 8 inches and a width of 2 inches, it can sustain rough terrains while providing a smooth ride. E...Read morenhancing performance and providing more efficient mowing, this Husqvarna wheel is manufactured for durability. Ensure a well-maintained lawn space with this versatile Husqvarna wheel & tire assembly. A perfect choice for keeping your Husqvarna lawn mower performing at its best.

The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers to install. If broken, damaged or worn, there may be a problem with the part it is securing and the part should be replaced. Refer to your make, model and diagrams to check if this is the right part.

This blade adapter is a genuine manufacturer approved replacement part. It is specially made for use with walk-behind push lawn mowers. This adapter secures with the blade and allows it to be connected to the spindle. It is made out of metal and it is sold individually. You would need a wrench when replacing this adapter to remove/install the blade bolt.

This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this item. This part is made of h...Read moreigh-quality metal and it is sold individually, you will need a wrench to secure or remove it.

This is an authentic OEM part for use with Poulan, Husqvarna, Weed Eater, Troy-Bilt.and Jonsered Lawn Mowers. The ground drive belt connects the engine crankshaft to the transaxle pulley to drive the rear wheels. If the belt breaks, the lawn tractor won't move. If the belt is worn, the lawn tractor moves sluggishly because the belt slips ...Read moreon the pulley. This part is sold individually. The tool that you will need to replace the ground drive belt is a socket set.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with lawnmowers from Husqvarna, Poulan, Weed Eater, and Jonsered. The control lever and cable is used to adjust the engine's output. This item is available as an individual replacement part.

This replacement wheel is a genuine manufacturer-sourced component which is specially designed for Poulan rotary lawn mowers. It is the rear 14-In wheel that supports the unit and allows for easy transportation, this part provides an identical replacement for a missing or damaged part that was installed on the new unit. This high-quality ...Read morewheel is made of durable plastic and is sold individually, please note the hardware to secure it is sold separately.