Models > AER6303MFW2

AER6303MFW2 Maytag Range - Overview

Sections of the AER6303MFW2

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(6)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$19.99
  In Stock
Oven Sensor – Part Number: WPW10181986
Oven Sensor
★★★★★
★★★★★
(31)
PartSelect #: PS11749737
Manufacturer #: WPW10181986
This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. The sensor detects the temperature in the oven cavity. If the followi...
$91.78
  In Stock
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(1)
PartSelect #: PS385132
Manufacturer #: 72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.44
  In Stock
Terminal Block – Part Number: WPW10245259
Terminal Block
★★★★★
★★★★★
(17)
PartSelect #: PS11750972
Manufacturer #: WPW10245259
This part is for oven ranges, it connects individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness...
$29.44
  In Stock
2 Piece Broiler Pan – Part Number: 4396923
2 Piece Broiler Pan
★★★★★
★★★★★
(4)
PartSelect #: PS971245
Manufacturer #: 4396923
This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high temperatures. This set ...
$39.67
  In Stock
Infinite Switch - 8 Inch – Part Number: WP3148953
Infinite Switch - 8 Inch
★★★★★
★★★★★
(8)
PartSelect #: PS11740775
Manufacturer #: WP3148953
This switch controls the stovetop surface burner. This surface element control switch is for ranges. Surface element control switch turns the surface element on and off and controls how much hea...
$68.00
  In Stock
Light Socket – Part Number: W11281687
Light Socket
★★★★★
★★★★★
(10)
PartSelect #: PS12584564
Manufacturer #: W11281687
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
$47.43
  In Stock
Side Trim - Right Hand Side – Part Number: WP8523166
Side Trim - Right Hand Side
★★★★★
★★★★★
(4)
PartSelect #: PS11746045
Manufacturer #: WP8523166
This trim is white in color.
$67.60
  In Stock
Side Trim - Left Side - White – Part Number: WP8523172
Side Trim - Left Side - White
★★★★★
★★★★★
(5)
PartSelect #: PS11746047
Manufacturer #: WP8523172
Screws are not included with the trim. Must order screws separately.
$48.92
  In Stock
6" Surface Element, 1200 W – Part Number: W11171119
6" Surface Element, 1200 W
★★★★★
★★★★★
(11)
PartSelect #: PS12348164
Manufacturer #: W11171119
Sold individually.
$127.01
  In Stock
Rear Leveling Leg – Part Number: WPW10058460
Rear Leveling Leg
PartSelect #: PS11748094
Manufacturer #: WPW10058460
Sold individually.
$9.72
  In Stock
Vent Trim - (Black) – Part Number: WPW10310922
Vent Trim - (Black)
★★★★★
★★★★★
(10)
PartSelect #: PS11752547
Manufacturer #: WPW10310922
This black stainless steel oven door vent fits on the top of the oven door, attaches the door handle and the outer glass to the door itself, and vents hot air out of the oven. The vent measures approx...
$172.85
  In Stock

Questions And Answers for AER6303MFW2

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the AER6303MFW2

[Viewing 8 of 8]
Element will not heat
Fixed by
these parts
Show All
Little to no heat when baking
Fixed by
these parts
Show All
Oven is too hot
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Oven not heating evenly
Fixed by
these parts
Show All
Door won’t close
Fixed by
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
Show All
Touchpad does not respond
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
temperature not accurate after 3 1/2 years of happy usage
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.

The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
Parts Used:
Oven Sensor
  • Ruth from Oregon, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
129 of 220 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
mice had made nests in the insulation wrap in the range
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Parts Used:
Insulation
  • Wendy from Red Hook, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
74 of 87 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The burner would keep heating after turning off the switch
Start by turning off the power to the range.
It was fairly easy to take the "Control Deck" off the top of the range by removing about 8 screws. I leaned the deck forward without removing any wires except a green ground that was held on by one of the screws.
There are two small screws under the switch knob holding the Infinite Switch to the panel. I removed these and let the switch hang on the wires. To avoid missplacing or crossing the wires... I moved one wire at a time to the new switch, then attached the switch to the panel and put it all back together.
Whole job was done in about 15 minutes
Parts Used:
Infinite Switch - 8 Inch
  • RON from KAUFMAN, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
60 of 67 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!