EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

ADB2500AWW1 Amana Dishwasher - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Latch Assembly – Part Number: W10862259
$73.04
In Stock
Door Latch Assembly
★★★★★
★★★★★
(135)
Part #W10862259
This replacement part is a door latch assembly for a dishwasher. The latch keeps the appliance door closed while it is running, and prohibits the dishwasher from starting when the door is open. Depending on your model, you will need to remove approximately eleven screws to remove the inner panel and access the latch assembly. The latch assembly is connected by two wiring harnesses that are nearly identical, so it is recommended to make note of where each harness goes before continuing with the repair. You will need a Torx screwdriver to complete the repair. Disconnect the dishwasher from the power source before beginning this repair.
Washer Hose Clamp – Part Number: WP596669
$7.47
In Stock
Washer Hose Clamp
★★★★★
★★★★★
(1)
Part #WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.
Dishwasher Inner Door Foam Insulation Strip – Part Number: WPW10117748
No Longer Available
Dishwasher Inner Door Foam Insulation Strip
★★★★★
★★★★★
(6)
Part #WPW10117748
This genuine inner door foam insulation strip, sometimes known as bottom seal foam, is used to create a waterproof seal that helps prevent leaking from the door area of the dishwasher. The existing insulation strip may leave a sticky residue or leftover disintegrated strip that must be scraped off before installing the new strip. Residue can be scraped off with a putty knife. Be sure to remove all residue and clean surrounding areas of the dishwasher build. It is strongly recommended to check other sealant parts on the dishwasher door such as the door gasket and dispenser grommet to ensure the leaking issue is fully solved.
Dishwasher Accumulator Filter – Part Number: WPW10192799
$142.08
In Stock
Dishwasher Accumulator Filter
★★★★★
★★★★★
(7)
Part #WPW10192799
This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty dishes.
Docking Station with Flappers – Part Number: 6-917647
No Longer Available
Docking Station with Flappers
Part #6-917647
The docking station is located on the water supply tube at the far back. It provides water to the upper and middle spray arm and also includes the flappers.
Dishwasher Door Cable Link – Part Number: WP99003446
$9.62
In Stock
Dishwasher Door Cable Link
★★★★★
★★★★★
(7)
Part #WP99003446
This is a part for your dishwasher. The door cable link helps to keep the door steady and give support to the weight of the door when it is being opened or closed. If you notice the door latch has failed or the door is not closing properly, this might indicate a need to have the door cable link replaced. To perform this repair, you will start by turning the power off from the appliance. You will need to pull the unit out of installation. To access the cables, you will need to remove the side panel. You should be able to see the cables underneath the panel once removed.
Water Valve – Part Number: W11082871
$85.00
In Stock
Water Valve
★★★★★
★★★★★
(5)
Part #W11082871
This is the replacement water valve for your dishwasher. The water inlet valve connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your dishwasher continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Before you begin this repair, be sure to disconnect the water and power sources from your dishwasher. This part is sold individually and is an OEM part sourced directly from the manufacturer.
USE WPL 99002588 – Part Number: 99002588
No Longer Available
USE WPL 99002588
Part #99002588
It provides a waterproof seal between the tub and the door.
Lower Dishrack Kit – Part Number: W10280784
No Longer Available
Lower Dishrack Kit
★★★★★
★★★★★
(8)
Part #W10280784
This kit includes the dishrack, clips, wheels and silverware basket. As per the manufacturer this kit no longer includes the tines.
Dishwasher Lower Spray Arm Shield Included – Part Number: WP6-917642
No Longer Available
Dishwasher Lower Spray Arm Shield Included
★★★★★
★★★★★
(3)
Part #WP6-917642
This spray arm is located on the lower half of your dishwasher. Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dishrack.
Float Switch Kit – Part Number: W10202535
No Longer Available
Float Switch Kit
★★★★★
★★★★★
(1)
Part #W10202535
Water that fills your dishwasher lifts this float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the switch to shut off, thereby shutting off the flow of water into the dishwasher.

Common Symptoms of the ADB2500AWW1

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Handle and latch broke
142 of 156 people found this instruction helpful.
  • Marilyn from Marsing, ID
  • Really Easy
  • Less than 15 mins
I had to force the door open, due to a broken handle/latch.
Ordered assembly with help of order desk to assure correct part number. Arrived within 3 to 4 days. Not sure but very fast. Only had to wash dishes by hand once.
Turned off power to dishwasher, my electrical panel is clearly marked with switch for dishwasher. No guess work there.
3 min. to remove old assy. 3 min. to replace with new part.
I might add that I am a 67yr. old female. So if I can handle this repair, anyone can.
Saved repairman service call, or purchasing a new dishwasher.
Was this helpful?
Thank you for voting!
Broken Inlet Valve due to freezing - water leak
86 of 87 people found this instruction helpful.
  • Craig from Old Orchard Beach, ME
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Wrench (Adjustable)
Most of the time was spent pulling out the dishwasher from under the counter, as a new tile floor had been installed after the DW was installed.

Great pictures of components on this website confirmed what part to order.

Shut off water feed to DW and disconnect power to DW.

Unplug wire connector to old valve (solenoid) and disconnect water inlet hose. Observe that valve is attached to sheet metal bracket.

Remove bracket, with valve attached. Don't remove valve from bracket. New valve comes with sheet metal bracket.

Remove female threaded adaptor (brass) from back of old valve and screw on to new valve using Teflon tape. That is the only piece you need to reuse.

Attached the new bracket (with valve attached) to DW. Attach water inlet hose. Attach plug to new valve.

Turn on water to DW. Check for leaks. Retighten hose connection if required. Run dishwasher. Keep lower panel off for a couple of days to be certain no leaks develop.
Was this helpful?
Thank you for voting!
Broken latch.Hard to shut, nearly impossible to open.
90 of 100 people found this instruction helpful.
  • Carl from Oneonta, NY
  • Easy
  • Less than 15 mins
  • Nutdriver
Removed the screws on the door of the dishwasher, lifted up inside of door to get to the latch assembly, unplugged the 2 sets of wires, removed the old broken latch. To install new latch did all of the above in opposite order.
Very simple, quick easy fix. The only thing that might be an issue for some people is that you need a set o r torx head screw drivers. (nice little set at Home Depot for less than $10. I'd say.)
Was this helpful?
Thank you for voting!