If the bucket is full indicator on your dehumidifier is on but the bucket is empty, you may have a problem with the float. If you notice that the float is warped or damaged, it should be replaced. This device is located near the bucket and prevents the dehumidifier from overflowing. You will need to open up the dehumidifier to complete th...Read moreis repair. This product is approximately 4 inches in length. Many of our customers have rated this repair as easy. To complete the repair simply remove the clips that hold the float in place, attach the new float, and replace the clips.
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to ...Read morewear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.
This is a water hose clamp kit for a variety of appliances including dishwashers and washers. This is a genuine replacement part. The kit includes two hose clamps. The smaller of the two is 1 inch in diameter while the larger one is 2 inches in diameter. The hose clamps secure the end of the water hose in place to prevent the hose from le...Read moreaking. If you notice leaking from the hose of your appliance, you may need to replace this kit. Protect your hands with work gloves during this repair to avoid injury.
This bucket and float kit, also known as water tank assembly, is for a dehumidifier is 14.5 inches long and 8.5 inches wide. The water tank extracts, traps, and contains the moisture from the air, which dehumidifies your room. The kit contains one bucket, one flat, and two screws for installation. The bucket is white and made of plastic. ...Read moreYou may need to replace this part if your dehumidifier is no longer trapping the water properly. This is an authentic part from the genuine manufacturer, and you cannot order the parts individually.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The dehumidifier did not turn off automatically when the collection bucket was full (or removed).
3 of 3 peoplefound this instruction helpful.
Michael from Madison, NC
Easy
Less than 15 mins
Screw drivers
The microswitch that senses a full or missing collection bucket can almost be removed without taking off the cover of the dehumidifier, but the arrangement and orientation of connector contacts makes that very difficult. It took me five minutes to remove the cover (Phillips head screwdriver), 30 seconds to replace the switch, and a few m
... Read moreinutes to re-install the cover. Works like a champ.
Read less
Was this helpful?
Thank you for voting!
the dehumidifier was not shutting off when water level was full
5 of 9 peoplefound this instruction helpful.
Steven from Owings Mills, MD
Really Easy
Less than 15 mins
replaced a piece of the plastic at the top of the bucket that seems to be the water gauge. this seems to be fixed. we are very happy
Was this helpful?
Thank you for voting!
broken plastic wheel on dehumidifier so it wouldn't stand up straight.
6 of 14 peoplefound this instruction helpful.
Charles from So. Orleans, MA
Easy
Less than 15 mins
I was able to pull the old wheel off and then went to google on the computer and put in whirlpool dehumidifier. I was directed to a website where I could put in the model # of the appliancew and then was able to view pictures of repair parts. I was able to view the actual caster and determine that I was ordering the right one. The part ca
... Read moreme about 3 days later and I was able to snap it on without using any tools. There was alittle plastic guide to hold aside and slide the new caster in place.