EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

AD60LBK0 Whirlpool Dehumidifier - Overview

Diagrams for AD60LBK0

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dehumidifier Float – Part Number: WP1172075
No Longer Available
Dehumidifier Float
★★★★★
★★★★★
(6)
Part #WP1172075
If the bucket is full indicator on your dehumidifier is on but the bucket is empty, you may have a problem with the float. If you notice that the float is warped or damaged, it should be replaced. This device is located near the bucket and prevents the dehumidifier from overflowing. You will need to open up the dehumidifier to complete this repair. This product is approximately 4 inches in length. Many of our customers have rated this repair as easy. To complete the repair simply remove the clips that hold the float in place, attach the new float, and replace the clips.
Range Hex Nut – Part Number: WP488130
$8.55
Special Order
Range Hex Nut
★★★★★
★★★★★
(2)
Part #WP488130
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to wear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.
Refrigerator Single Hex Head Screw – Part Number: WP489069
$7.47
In Stock
Refrigerator Single Hex Head Screw
Part #WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
Refrigerator Screw – Part Number: WP3196557
$7.47
In Stock
Refrigerator Screw
Part #WP3196557
Sold individually.
Fan Motor – Part Number: 4389130
$149.81
Special Order
Fan Motor
Part #4389130
This fan motor controls the circulating fan in the dehumidifier.
Float Clip – Part Number: WP1186430
No Longer Available
Float Clip
★★★★★
★★★★★
(1)
Part #WP1186430
The float clip works in a humidifier to ensure the float functions properly. The float is located near the humidifier bucket and monitors the water level as it rises and the clip keeps it in place. The float makes sure the water level is balanced and does not over flow. This float triggers the flow switch to shut off. If there is a defect with the clip, it can be a safety hazard as it might not be able to detect and stop an overflow. Make sure to unplug the dehumidifier from the power source before starting this replacement project as a safety precaution.
Zip Tie – Part Number: WPW10339879
$7.47
In Stock
Zip Tie
Part #WPW10339879
A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it should be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.
Hose Connector Cover – Part Number: 1172098
No Longer Available
Hose Connector Cover
Part #1172098
Castor – Part Number: 1164241
No Longer Available
Castor
Part #1164241
Also known as wheel or roller. This part is sold individually.
PAN-DRAIN – Part Number: 1168761
No Longer Available
PAN-DRAIN
Part #1168761
Fan Blade - Black – Part Number: 1188552
No Longer Available
Fan Blade - Black
★★★★★
★★★★★
(1)
Part #1188552
This fan blade attaches to the motor in your dehumidifier. This fan has 7 blades that turn while the dehumidifier is operating. If you notice that your dehumidifier is malfunctioning, you may need to replace the fan blade. This part is black in color, made of plastic, and is 9 inches in diameter. The fan blade is located in the interior of the dehumidifier. This is an OEM part sourced directly from the manufacturer. Be sure to disconnect your dehumidifier from the power source before you begin this repair. This part is sold individually.

Manuals & Care Guides for AD60LBK0

Click to download
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
the dehumidifier was not shutting off when water level was full
5 of 9 people found this instruction helpful.
  • Steven from Owings Mills, MD
  • Really Easy
  • Less than 15 mins
replaced a piece of the plastic at the top of the bucket that seems to be the water gauge. this seems to be fixed. we are very happy
Was this helpful?
Thank you for voting!
bad control on 1998 Whirlpool dehumidifier
1 person found this instruction helpful.
  • Alan Van from Springfield, OR
  • Easy
  • 30 - 60 mins
  • Screw drivers
Disassemble all the housings starting with front cover, top, sheetmetal side/back piece and top styrofoam support. The top slides back 3/8" before you can lift it up off the keys. Carefully pry/pop the control board loose from the top piece and swap all the wires. Had to cut loose 2 zip-ties to re-route the tank switch wires: immediately replace with new zip-tie left full loose so new wires can be re-routed without wiring bundle falling all over. Get all the wires positioned and finish tightening up the zip-ties, but not all the way, just like the factory did. Cut the tails on the ties.

While all the housings were off I vacuumed off the parts and coils and washed the fan blades off with soapy water and a sponge. Looked for chafed wires and such. Trimmed the coil case up with sheet metal shears where it was rubbing on the styrofoam bottom tray and gently filed the cut smooth.

Reassembly: snap the board back into the top piece, put the styrofoam top support on, then the side/back metal, then the top, dropping it onto the keys and sliding it forward again. The front piece goes on last.
Was this helpful?
Thank you for voting!
float was missing
2 of 5 people found this instruction helpful.
  • barbra from STERLING HTS, MI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
pried off the plastic fastener with flat blade screw driver set new float in place then pressed plastic fastener back in place
Was this helpful?
Thank you for voting!