A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it shou...Read moreld be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.
This access valve is an authentic manufacturer parts kit used in appliances with a refrigerant such as the refrigerator and air conditioner. This kit includes a valve body, valve core and a valve cap. The body and cap are made of brass while the core is made from steel. If you notice that your appliance is leaking, not cooling adequately ...Read moreand the valve components are corroded, you should replace the access valve. As part of your general maintenance, you should also replace the valve if your appliance is more than 10 years old and the valve has never been changed. Use a valve wrench to remove the valve cap and use a core removal tool to pull out the core. Install the new valve body, core and cap and ensure they are securely fitted. Note that these parts are sold together.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Trina - For model number AD50USS2
January 3, 2020
Do we add water in bucket
Hi Trina, no you just have to empty it. Thank you for your question and good luck with your repair!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Lee - For model number AD50USS2
June 15, 2024
H2O will not go to drain hose And fills bucket. All gravity drain lines are open and unrestricted.
Hi Lee, thank you for the question. Ensure that the hose is properly installed and has a good connection. If the connection is loose, gently tighten the connection. Make sure not to push the hose too far into a drain, such as a standpipe, and if the hose comes into contact with water, it will not drain either. Pull out the hose until the hose outlet is above the waterline. Cut off any excess hose so that it is moving in a straight line to the drain. Avoid using an old or damaged hose. We hope this information helps!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Weldon - For model number AD50USS2
November 4, 2022
do not collect water; the fan runs ok
Hello Weldon, thank you for contacting us. Sometimes due to a clogged and damaged filter, such a problem arises. We would recommend replacing the filter, part number PS11738449. Also, inspect the valves and clean them. If the valve, part number PS11747411, is damaged, we would recommend replacing it. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
broken plastic wheel on dehumidifier so it wouldn't stand up straight.
6 of 14 peoplefound this instruction helpful.
Charles from So. Orleans, MA
Easy
Less than 15 mins
I was able to pull the old wheel off and then went to google on the computer and put in whirlpool dehumidifier. I was directed to a website where I could put in the model # of the appliancew and then was able to view pictures of repair parts. I was able to view the actual caster and determine that I was ordering the right one. The part ca
... Read moreme about 3 days later and I was able to snap it on without using any tools. There was alittle plastic guide to hold aside and slide the new caster in place.